Month: February 2015

GN Solids Control is China leading solids control equipment manufacturer with over 70% sales amount from overseas market. The annual sales amount for shale shaker & mud cleaner is over 250 sets; the annual sales for decanter centrifuge is over 150sets; the annual sales for mud agitator & mud gun is over 400sets; the annual sales amount for shaker screen is over 10000pcs, including replacement screen for Derrick 500/2000 PWP/PMD screen, replacement screen for Swaco Mongoose screen, replacement screen for NOV Brandt King cobra screen.

At the ending of last year, GN get big order from Africa & Europe. The Africa customer buy one sets 3500bbl mud tanks system for mud storage and service for over 3 land rigs; Another company from Europe buy 3 sets 1000hp oil drilling rig solids control mud system after checking the performance of 750hp rig mud system from GN Solids Control.

The solids control equipment for 1000hp oil drilling rig including:

Continue reading “Solids Control Equipment for 1000hp oil drilling rig”

GN designed and produced oil drilling solids control system and drilling mud recycling system have been operated in the rig sites of 60 countries in the world, including Cuba. Estimates of total oil reserves in Cuba are varied, and depend mainly on estimations of undiscovered offshore deposits in the North Cuba Basin. Fearing an oil spill in Cuban waters, U.S. officials have forged a bond with the Castro regime to preserve the threatened marine ecosystem that connects the island nation to the Florida coast.

Below photos showed the workover rig solids control system used in Cuba: It including one set of XJ450 workover rig solids control system and one set of XJ650 workover rig mud recycling system. The main configurations are as below:

XJ450 workover rig solids control system:

2 units of mud tanks with mud agitators, mud guns, hoppers

1 set of mud gas separator

1 unit of water tank

1 unit of waste collection box

XJ650 workover rig mud recycling system:

2 units of mud tanks with mud agitators, mud guns, hoppers and shale shaker GNZS703E-HB

1 unit of diesel tank

1 unit of water tank

1 unit of fuel tank

1 unit of waste collection box

1 set of mud gas separator

The main features of these mud tanks are not traditional Rectangle tank, but V-bottom tank for easy cleaning of solids. Except for such design, we can also provide customized design tank like round bottom tank for easy cleaning, trailer/wheel mounted mud tank for easy transportation, and 3-runner oilfield standard design mud tanks. The mud tanks qty and total system volume can be also customized. If only the end-user have such special requirement, we will try our best to provide the best solution for your rigsite.

Pls contact either GN solids control or GN solids America for a customized proposal.

Related Arciels:

• LMP and Corresponding equipment for LMP
• Decanter centrifuge noise
• Dewatering Unit Application and GN APM Mixing Unit
• GN ATEX and CE certified Solids Control System for Oil Drilling to Europe
• GN High G Force Drying Shaker with Hopper Design Slurry Feeder

Africa, is a mysterious land to many people’s eyes. But the Oil and Gas linked GN Solids Control to the African countries via the good quality solids control and waste management equipments and responsible service of GN commissioning team. These 10 sets of GN Decanter centrifuges are ordered by a large African drilling company, they are ready for dispatch now and will be shipped to Africa in recent days.

GNLW363 is most popular product of GN. 14 inch bowl diameter decanter centrifuge is most popular size internationally, because: 1. the treating capacity depends mostly on the bowl diameter, and such treating capacity could meet most applications. 2. In order to get a good drying result, the length-diameter ratio is better at 3, and the cost for a 51 inch bowl length is of more cost-effective during production.

GN’s advantages in this model: for the same bowl diameter and specification of centrifuge GNLW363, GN Solids Control provide 4 options: 1, Economic solution: GNLW363CD, fixed speed, 2. Economic solution: GNLW363CD-VFD, vfd control panel. 3. Highest solution: GNLW363CG, fixed speed, 4. Highest solution: GNLW363CG-VFD. Customers could choose any of them per the jobsite need or per budget.

GNLW363CG series decanter centrifuge: it is not only the highest GN standard centrifuge, but also, it is highest international standard centrifuge in solids control field. See what material GN chooses for this centrifuge: SS2205 for rotating bowl, SKF bearings, easily adjustable liquid level ports, most anti-wearing tiles on impeller and etc.

Customers could choose per their jobsite condition fixed speed one or VFD control panel. In case of VFD control panel, the working speed could be easily set from 0 RPM to 3200 RPM. In case of fixed speed, it doesn’t mean only 1 speed only. Customers could choose 2 extra pulley and belt for another 2 operating speeds, in order to be suitable for different applications.

 

May you need more information of GN or GN products, welcome to visit our website.

 

Related Arciels:

• The function of decanter centrifuge
  
• The Cuttings Discharge Pump
• Dewatering System of GN Solids Control
• How to Choose Appropriate Decanter Centrifuge in Solids Control project
• GN Vertical Cutting Dryer for Drilling Waste Management System