Desander and Desilter for Drilling Mud System

GN Solids is professional manufacturer for complete sets of drilling mud separation and recycling equipment. The conventional equipment like shale shaker, mud cleaner, desander, desilter, vacuum degasser, decanter centrifuge, mud agitator, mud gun, centrifugal pump, screw pump, etc. Here, let’s learn more about desander and desilter.

1. The general installation type and function of desander and desilter

Desander and desilter are solids control equipment with a set of hydrocyclones that separate sand and silt from the drilling mud used on drilling rigs.

They can be installed separately: Desander is installed on top of the mud tank following shale shaker and vacuum degasser, but before the desilter. Desilter is installed on top of the mud tank following Desander. They also can be installed completely: in this case, they are installed on one deck shaker and called mud cleaner or mud conditioner.

Desander removes the abrasive solids from drilling mud which cannot be removed by shale shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter

desilter

Continue reading “Desander and Desilter for Drilling Mud System”

Shale Shaker Screen Applications

GN Solids is professional solids control equipment manufacturer. We can offer shale shaker, mud cleaner, de-sander, de-silter, decanter centrifuge, centrifugal pump, mud agitator, mud tanks etc. Regarding shale shaker, shaker screen is the most important spare parts. The shaker screen should be chosen by mud engineer who is in charge of test the property of drilling mud.

GN Solids is professional solids control equipment manufacturer. We can offer shale shaker, mud cleaner, de-sander, de-silter, decanter centrifuge, centrifugal pump, mud agitator, mud tanks etc. Regarding shale shaker, shaker screen is the most important spare parts. The shaker screen should be chosen by mud engineer who is in charge of test the property of drilling mud.

shale shaker

Continue reading “Shale Shaker Screen Applications”

Hi-G Dryer Shaker vs Double Deck Shaker

On oil drilling rig site, Hi-G dryer shaker and double deck shaker is widely used for drilling cuttings treatment and recycling. They are both linear motion shale shaker. Some customer do not know the difference of Double deck shale shaker and High-G dryer shaker. As world top solids control and waste management equipment manufacturer, GN Solids can tell you the difference of the 2 types of shale shaker and choose the suitable model for your drilling rig.

On oil drilling rig site, Hi-G dryer shaker and double deck shaker is widely used for drilling cuttings treatment and recycling. They are both linear motion shale shaker. Some customer do not know the difference of Double deck shale shaker and High-G dryer shaker. As world top solids control and waste management equipment manufacturer, GN Solids can tell you the difference of the 2 types of shale shaker and choose the suitable model for your drilling rig.

Hi-G Dryer Shaker ( recommended model GNZS594, linear motion)

Compared with traditional shale shaker, this model with a Higher G force, can get better vibration screen separation. This model with 4 panel Mongoose shaker screen, can get bigger treating capacity. And the shaker screen is interchangeable with Swaco Mongoose screen, you can get the shaker screen from local Swaco distributor easily.

As it is single deck, relative easy to change shaker screen compared with double deck shale shaker.

High-G dryer shaker

Continue reading “Hi-G Dryer Shaker vs Double Deck Shaker”

Nigeria Market Imported Decanter Centrifuge from GN Solids

Nigeria, as the world sixth-largest producer of crude oil, the oil exporation and drilling business is very hot. This lead to large demand on equipment used for oil drilling. GN Solids is China manufacturer focus on solid control and drilling waste management equipment. During the year of 2013, Nigeria market imported 15 sets of decanter centrifuge from GN Solids.

Nigeria, as the  world sixth-largest producer of crude oil, the oil exporation and drilling business is very hot. This lead to large demand on equipment used for oil drilling. GN Solids is  China manufacturer focus on solid control and drilling waste management equipment. During the year of 2013, Nigeria market imported 15 sets of decanter centrifuge from GN Solids.

The most popular centrifuge model for Nigeria oil drilling market is GNLW363VFD. Almost every customer like this model because of big treating capacity, higher G-Force, variable frequency drive. So far we have many successful maketing cases to proof GN Solids Centrifuge with reliable working performance.

Hereunder, pls see below chart of different brand comparison.

Centrifuge Comparison-Brandt HS3400-GNLW363VFD-Swaco 518

Any requirement or questions on centrifuge or other solid control equipment , pls contact GN Solids. We will offer you best support and reliable equipment.

Or send email to : roy@gnsolidcontrol.com   0086-156 0305 4293