Month: September 2011

Many of GN clients use Ditch Witch rig and buy mud cleaning system from GN. Unlike other China Solids Control companies, they mainly only focus on oil gas drilling multitank big system, GN Solids Control is the most professional for compact Mud System for HDD or CBM in China.

Ditch Witch complete directional drills package including directional drilling rigs, fluids management system, drill pipe, and integrated electronics that enable the tracker operator to disable power to the drilling unit’s thrust and rotation.  Ditch Witch compact directional drilling rigs are ideal for small contractors and designed for easy setup on jobsites once considered too tight for directional drilling.

GN Solids Control design and manufacture complete equipments for HDD (Horizontal

Directional Drilling) and CBM(Coal Bed Methane) drilling mud recycling system of :

150GPM / 350GPM / 500GPM / 800GPM / 1000GPM / 1500GPM /2000GPM.

GN150gpm mud system is specially designed for separating drilling cuttings from drilling mud within no dig processes. Due to the mini container dimensions, the mud recycling separation plant guarantees minimum setup times and an easy transportation. The mini system has been ready for operation on site and GN will dispatch engineer to provide first installation and commissioning to save customer’s time and connection work.

Continue reading “Ditch Witch rig mud cleaning system”

Many clients asked us this question, how to revert API To Micron for Shaker screen mesh，even most of shaker screens manufactures in China do not have this knowledge. Some manufacturers use the API number as mesh directly, this will be incorrect, if clients do not have professional knowledge, they will use the wrong mesh screens and can not get the ideal result.

Here we will introduce how to revert API To Micron for Shaker screen.

Mesh Conversion table
mesh	Micron	API range	Inches
20	840	0.84	0.0331
30	590	0.59	0.0232
40	420	0.42	0.0165
50	297	0.30	0.0117
60	250	0.25	0.0098
70	210	0.21	0.0083
80	177	0.18	0.0070
100	149	0.15	0.0059
120	125	0.13	0.0049
140	105	0.11	0.0041
170	88	0.088	0.0035
200	74	0.074	0.0029
230	62	0.062	0.0024
270	53	0.053	0.0021
325	44	0.044	0.0017

This is a chart to show how to convert mesh to microns, to know how to convert microns( D100 separation), then to know how to convert mesh to API, or API to mesh, pls contact GN solids control.

We can produce replacement shaker screens for Derrick 500, Derrick 48-30, Kem-tron KTL48, Swaco Mongoose, Brandt King Cobra shaker screens.

 

Oil Well Choke & Kill Manifold are a kind of well-control equipments, GN solids control do not produce such equipments, our products range including a complete set of solids control equipments and mud tanks.

An arrangement of piping or valves designed to control, distribute and often monitor fluid flow. Manifolds are often configured for specific functions, such as a choke manifold used in well-control operations and a squeeze manifold used in squeeze-cementing work. In each case, the functional requirements of the operation have been addressed in the configuration of the manifold and the degree of control and instrumentation required.

Chock Manifold

Oil well choke manifold is high-pressure pipe leading from an outlet on the BOP stack to the backpressure choke and associated manifold. During well-control operations, the fluid under pressure in the wellbore flows out of the well through the choke line to the choke, reducing the fluid pressure to atmospheric pressure. In floating offshore operations, the choke and kill lines exit the subsea BOP stack and then run along the outside of the drilling riser to the surface.

A choke manifold is used to lower the pressure from the well head. It consists of a set of high pressure valves and at least two chokes. These chokes can be fixed or adjustable or a mix of both. The redundancy is needed so that if one choke has to be taken out of service, the flow can be directed through another one. these long choke and kill lines must be considered to control the well properly.

Kill manifold

Continue reading “Oil Well Choke & Kill Manifold manufacturer”

Vibrating screen normally called shale shaker in oil and gas drilling industry. GN solids control produce vibrating screen machine and replacement screens for it.

Working principle of vibrating screen:

By the motor force and adjusting the amplitude of the eccentric shaft, vibrating screen moves quickly like a circle. Materials in the sieve case can be saperated and screened from the sieve pore in this process.

Vibrating screen in Venezuela

We are seeking for a distributor in Venezuela to have some of our shaker screens in stock, the local market’s requirement is very large. If you are interested in GN distributor in Venezuela, and have large enough warehouse and good client’s network, pls contact GN solids control.

GN vibrating screen model:

By treating capacity:

80m3/h, 120m3/h, 150m3/h, 200m3/h

By vibration motion:

Linear motion and balanced elliptical motion

By screen panel qty

2-screen-panel, 3-panels, 4-panels

By location of buffer box( inlet method):

Top-buffer-box, back-buffer box

Continue reading “Vibrating screen in Venezuela”