Gas buster also called poor boy degasser or mud gas separator, which is used for oil and gas drilling. The description on oilfield glossary is “A simple separator vessel used to remove free or entrained gas from fluids circulated in the wellbore, such as mud used during drilling operations. The gas buster typically comprises a vessel containing a series of baffles with a liquid exit on the bottom and a gas-vent line at the top of the vessel”.
Gas buster
gus buster Gas Buster
is an important equipment to prevent well kick during drilling, so the production process should be strictly controlled. The process control including the following aspects:
1 Surface preparation
Steelwork:
Before all paint actions will be taken the surface to be coated must be clean and free from contamination. Sharp edges shall be rounded or smoothed to radius 2 mm. Hard surface layers shall be removed by grinding before blasting. All welds shall be fully sealed.
Abrasive Blast Cleaning:
As abrasive steel grit or copper slag can be used. If oxidation has occurred between blasting and application of paint, the surface should be reblasted to the specified visual standard.
Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner.
2 Painting
Intershield 300 aluminium GTA 220
Intershield 300 bronze GTA 220
Interzinc 52 grey GTA 220
Intergard 475 HS grey MIO GTA 007
Interthane 990 Ral 7016 GTA 713
From the above process, GN gas buster can be H2S-proof for safety purpose. Welcome to inquiry GN solids control for more info.