Oilfield drilling Poor boy degasser that removes air or gases (methane, H2S, CO2 and others) from drilling liquids. There are two generic types that work by both expanding the size of the gas bubbles entrained in the mud (by pulling a vacuum on the mud) and by increasing the surface area available to the mud so that bubbles escape (through the use of various cascading baffle plates). If the gas content in the mud is high, a mud gas separator or “poor boy degasser” is used, because it has a higher capacity than standard degassers and routes the evolved gases away from the rig to a flaring area complete with an ignition source.
State International Engineering can design and manufacture mud gas separators, either as standalone units or supplied with choke and kill manifolds.It is used before shale shakers.
Based upon your predicted operating conditions and your required gas handling capacity we will be able to calculate the optimal size of your mud gas separator. All our mud gas separators are supplied with a complete calculation package; this will include mechanical strength calculations, theoretical separation capacities and safe working pressures etc.
All State’s poor boy degassers are fabricated to ASME VIII div 1 or PD 5500. The vessels are then hydrostatically tested with a 3rd party classification society witness. Our mud gas separators are supplied with a product certificate and design review.
State International Engineering poor boy degasser are supplied with top quality temperature and pressure sensing equipment where requested. These instruments can provide local displays at the separator, a display at the choke and kill control system and give repeated signals for the drilling control system. State can also provide loop seal pressure monitors and alarms. All this can be achieved through an State Int. Eng. hazardous area certified, control system.
Oilfield drilling Poor Boy degasser is professional equipment to treat the gas invade mud. When the drilling mud result gas invade, the proportion of its weight and viscosity have a greater deviation not to meet the requirements of drilling. The serious situation is that would cause Chung well, and even blowout accident occurred, if not to treat it timely. ZYQ series Gas-liquid Separator combined with the (Company site: Solids Control System
Electric Ignition Device can be used to ensure the drilling process smooth. It is devided into the normal pressure gas-liquid separator and pressure auto-control gas-liquid separator, according to the pressure.Ga-Liquid Separator is your best choice to prevent drilling fluids invasion.