HDD Drilling mud system

Generally,The mud cleaning system for removal of drill cuttings and recovery of drilling mud coming from an oil well, where the mud slurry may be made up essentially of barite particles having a specific gravity of 4.2 or more and a particle size mostly under 200 mesh, drill cuttings having a specific gravity of 2-3, and varying particle sizes ranging from 200 mesh to 1/2 inch or more, and water;

• In oil well drilling, drilling mud must be supplied to the hole as the well depth progresses. One of the basic functions of drilling mud is to carry the drill cuttings up to the surface so they can be disposed of. A drilling mud in common use today is typically composed of barite and water. There may be other constituents, (such as oil) but they would exist only in small amounts or percentages. Since large quantities of drilling mud are needed in drilling an oil well, it is desirable to recover the barite, and recycle it. Various drilling mud cleaning systems are in use today for separating the drill cuttings from the slurry so that the fluid and/or barite can be recycled. Most systems use a combination of one or more screens or sieves in a series flow relationship, with a final separating step using a hydrocyclone or centrifuge. Hydrocyclones desander and decanting centrifuges are expensive pieces of equipment with high energy and maintenance costs.

• In HDD drilling mud cleaning system,sometimes there is a single tank, closed-loop system or a multi-tank mud system is required, GN Solids Control can develop the proper system to meet specific requirements. from small HDD (hirontal directional drilling mud system) to deep oil well drilling mud system.

Drilling mud cleaning system for HDD and oil well is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Download List:

GN Solids Control Download list is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Oil well drilling equipments are a wide field industry,we specilize in drilling mud circulation system equipments. Such as shale shakers,mud cleaners,   Hydrocylone    desander, mud  desilters.

Now I share the history of oil well drilling history with you:

The earliest known oil wells were drilled in China in 347 CE. They had depths of up to about 800 feet (240 m) and were drilled using bits attached to bamboo poles.[1] The oil was burned to evaporate brine and produce salt. By the 10th century, extensive bamboo pipelines connected oil wells with salt springs. The ancient records of China and Japan are said to contain many allusions to the use of natural gas for lighting and heating. Petroleum was known as burning water in Japan in the 7th century.[2]

oil well drilling equiments

the Middle East’s petroleum industry was established by the 8th century, when the streets of the newly constructed Baghdad were paved with tar, derived from petroleum that became accessible from natural fields in the region. Petroleum was distilled by the Persian alchemist Muhammad ibn Zakarīya Rāzi (Rhazes) in the 9th century, producing chemicals such as kerosene in the alembic (al-ambiq),[3] and which was mainly used for kerosene lamps.[4] Arab and Persian chemists also distilled crude oil in order to produce flammable products for military purposes. Through Islamic Spain, distillation became available in Western Europe by the 12th century.

Some sources claim that from the 9th century, oil fields were exploited in the area around modern Baku, Azerbaijan, to produce naphtha for the petroleum industry. These fields were described by Marco Polo in the 13th century, who described the output of those oil wells as hundreds of shiploads. When Marco Polo in 1264 visited the Azerbaijani city of Baku, on the shores of the Caspian Sea, he saw oil being collected from seeps. He wrote that “on the confines toward Geirgine there is a fountain from which oil springs in great abundance, inasmuch as a hundred shiploads might be taken from it at one time.”

Shallow pits were dug at the Baku seeps in ancient times to facilitate collecting oil, and hand-dug holes up to 35 meters (115 ft) deep were in use by 1594. These holes were essentially oil wells. Apparently 116 of these wells in 1830 produced 3,840 metric tons (about 28000 barrels) of oil. In 1849, Russian engineer F.N. Semyenov used a cable tool to drill an oil well on the Apsheron Peninsula, ten years before Colonel Drake’s famous well in Pennsylvania. Also, offshore drilling started up at Baku at Bibi-Eibat field near the end of the 19th century, about the same time that the first offshore oil well was drilled in 1896 at Summerland field on the California Coast.

Drilling mud purification  system

1904 oil well fire at Bibi-EibatThe earliest oil wells were drilled percussively by hammering a cable tool into the earth. Soon after, cable tools were replaced with rotary drilling, which could drill boreholes to much greater depths and in less time. The record-depth Kola Borehole used non-rotary mud motor drilling to achieve a depth of over 12 000 meters (38,000 ft). Until the 1970s, most oil wells were vertical (although different lithology and mechanical imperfections cause most wells to deviate at least slightly from true vertical). However, modern directional drilling technologies allow for strongly deviated wells which can, given sufficient depth and with the proper tools, actually become horizontal. This is of great value as the reservoir rocks which contain hydrocarbons are usually horizontal, or sub-horizontal; a horizontal wellbore placed in a production zone has more surface area in the production zone than a vertical well, resulting in a higher production rate. The use of deviated and horizontal drilling has also made it possible to reach reservoirs several kilometers or miles away from the drilling location (extended reach drilling), allowing for the production of hydrocarbons located below locations that are either difficult to place a drilling rig on, environmentally sensitive, or populated.

You are welcome to visit our website,and contact us to consult equipments used in oil well drilling,especially,oil field mud circulation equipments.We sell  decanting centrifuge .

Oil well drilling equipments supplier-GN is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

To promote our drilling mud treatment and disposal equipments,we are looking for agents around world.This way we will also offer better local service to our international drilling mud treatment equipments customer.

Contact now:GN solids Control

drilling fluids disposal

Thanks for your interst in our drilling mud treatment equipments.

Our equipments and systems are widely used in oil gas drilling fluids mud disposal and treatment.

We are very interested in your proposition,and actually as you know,the drilling mud treatment equipments and systems are big deals,we do need local people to help us communicate with our international customers.And from your introduction of your company,we see you would be good at marketing our products in Syria.That would be great.

But you know,we need to understand each other better,so we recommend we do one regular deal first.,after that it would be the right time for us to get into agent,or sole agent in your country.

Our products including whole series of solids control equipments:

Drilling fluids treatment system, Shale Shaker, Mud cleaner, Hydrocyclone(Desander & Desilter),Decanting Centrifuge,Vacuum degasser,Sand pump,Gas-liquid Separator,Jet Mud Mixer,Mud Agitator, Shear Pump,Submersible slurry pump, Electric Ignition Device ,Mud Gun, Mud Tank,Mixed-hopper, series solid control equipment and the drilling fluid circulation system for oil gas drilling, the products are widely used in petroleum oil and gas exploration industry, no-dig engineering, geotechnical engineering, mine, metallurgy, coal, hydropower and many other industries.GN solids control products can be used in both onshore and offshore oilfield project.

For further info,pls let us know.And we are looking forward to our progress.

Awaiting your comments.And looking forward to getting into drilling mud treatment equipments business.

Regards

Be agent of China manufa

Want drilling mud treatment disposal equipments agent is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Buy are see specifications : Vacuum Degasser

vacuum degasser

the vacuum degasser is a special device used to process gas-trapped fluid commonly found in drilling operations in the oil field. This device is the latest degasser developed by our company, suitable for all kinds of mud cleaning system. It helps to recover the mud density and stabilize the mud viscosity, thus reducing the drilling cost. At the same time, if there are no gas bubbles in the mud, this device can be used alternatively as a large capacity stirring device.

We supply other related equipments:

linear motion shale shaker

Gas Liqiud Separator

Submersible Slurry Pump
Vacuum degasser is one important equipment for drilling fluids circulation system.

China Vacuum Degasser manufacturer is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

I talked with gn solids control  team today.We are very glad to find  exclusive agent (sole agent) for our solids control system and products around the world.
But firstly,you purchase one solids control system from us firstly to make us understand each other well.If it goes well,then we can get into sole agent contract.
At present,if you need the draft contract of sole agent in your country.we can prepare one for you.But we sign a formal one when it is the right time to get into solids control equipments and system sole agent.

GN Solids Control

We will help you in 3 main ways.
1Marketing hellp in solids control system  and equipments
Now our company just has a E-marketing plan by using SEO (search Engine optimization),Google adwords,and some good B2B platform etc.In this way,we will get us promoted well in the internet.If we get any inquiry from Nigeria,we will send it to our sole agent to take care of it.If so,you not only have your own sources for customers,but also we will get more and more for you.You can search keywords”solids control system” or “solids control equipments” at  www.google.com in English,Our new
website:http://www.gnsolidscontrol.com and http://oilfield.gnsolidscontrol.com are ranking well in Google.We just get started and many pages are in construction.They will rank better and better.We have professional SEO players
work for us.Moreover,if our business go well,we can give you some help in your E-marketing strategy.

2,Solids control Technique & Equipments help.
AS we have talked before.We can provide best products,and full technique helps to you.
It’s really a winwin coopertation.We don’t need to check much about the credit of our customers in Nigeria and take much time to deal with them.It’s more efficient to let our sole agent take care of the communications.Local
people serve local people,they understand each other well.And with your ability to tap the Nigeria market,we believe we will make great success in your market.

3,Other related help in China.
For example,we can help you find other related products manufacturer,we have many related products partners in China.Take rig owner for example.We can help you analyze them,and offer info. to you about them.
Pls tell us what do you think of it,and let us know if you need the draft contract for sole agent now?For any other info.Pls let us know.

Contact:GN solids control

solids control equipments system sole(exclusive) agent is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.