May 17

Centrifugal pump with mechanical seal some are required by GN Solids Control Clients for drilling mud System.As a manufacturer for mechanical seal centrifugal pump we give explanation info. as below.

Centrifugal Pump

A centrifugal pump is a roto dynamic pump that uses a rotating impeller to increase the pressure of a fluid. Centrifugal pumps are commonly used to move liquids through a piping system. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from where it exits into the downstream piping system. Centrifugal pumps are used for large discharge through smaller heads.

Centrifugal Pump With Mecheanical Seal

Centrifugal Pump With Mecheanical Seal

In some situations, packing material is not adequate for sealing a centrifugal pumps shaft. One common alternative method for sealing the shaft is with mechanical seals. Mechanical seals consist of two basic parts, a rotating element attached to the pump shaft and a stationary element attached to the pump casing. Each of these elements has a highly polished sealing surface. The polished faces of the rotating and stationary elements come into contact with each other to form a seal that prevents leakage along the shaft.

The most effective method of preventing the leakage of the drilling  fluids from the centrifugal pump to the external surroundings is using the mechanical seals. The mechanical seals Continue reading »

written by GN solids Control \\ tags: , ,

Apr 22

Our customers are always asking questions like: Can I have your reference list? Are your products adapt to our situation?  and so on… I konw what they really want to know: Why I choose GN Solids Control, and is there others used your products and do they satisfied with it?

Here we go!

Firstly, I will introduce you the principle of GN Solids Control: Only Top Quality Products! This is our promise!

Secondly, GN Solids Control supply all the parts of solids control system, including shale shakers, desanders, desilters, mud tank separation, centrifugal pumps, decanting centrifuges and so on, and GN supply all the products right as you required.

Shale shaker,linear motion shaker

Drilling mud shale shaker manufacturer,linear motion shale shakers for drilling fluids,Solids control shale shaker,oilfield drilling cuttings linear motion

Derrick Replacement 503 PMD shaker screen to Brazil

Twin drilling mud shale shaker and backup spare parts to Morocco

desander,hydrocyclone desander,China desander desilter manufacturer

Hydrocyclone desander manufacturer,oilfield desander with good cones,buy solids control drilling mud fluids desander from China supplier for sale.

desilter-hydrocyclone fluids desilter,drilling mud desilter

Hydrocyclone desilter manufacturer,drilling fluids desilter,mud desilter and desander with good cones,China oilfield solids control desilter supplier.

mud tank,drilling fluids tank,mud tanks design

Drilling Mud tank manufacturer,drilling fluids tanks customized design,design mud tanks for Oil Gas drilling and HDD Solids Control mud system.

Storage mud tank agitator to Thailand

Premix mud tank equipments and spare parts to Kazakstan

Drilling mud tank recycle systems equipments for Kazakhstan

Our customer is all over the world, as you can see, and click here to know more about GN news…

written by GN solids Control \\ tags: , , , , ,

Apr 20

Drilling mud (drilling fluids) is used to Remove cuttings from well; Suspend and release cuttings; Control formation pressures; Seal permeable formations; Maintain wellbore stability; Minimizing formation damage; Cool, lubricate; and support the bit and drilling assembly; Transmit hydraulic energy to tools and bit; Ensure adequate formation evaluation; Control corrosion (in acceptable level); Facilitate cementing and completion.drilling fluids(drilling mud) is pumped from the surface through the hollow drill string, exits through nozzles in the drill bit, and returns to the surface through the annular space between the drill string and the walls of the hole.oil-mud-separation

Linear motion shale shaker

The drill bit grinds rocks into drill cuttings, which are entrained in the mud flow and are carried out to the surface. And we separated the mud from the solids to make the mud return to the recirculating mud system. Continue reading »

written by GN solids Control \\ tags: , ,

Apr 08

Desander and desilter hydrociclones are device to separate particles from drilling fluid, which is sorted by shale shaker in the first phase of solids control system. You can see in the first picture.

hydrocyclone of desander and desilter Usage of hydrocyclone

A hydrocyclone is often used to separate drilling cuttings from drilling mud originating at a desander desilter or some other continuous source of pressurized liquid. A hydrocyclone is most likely to be th

e right choice for processes where “lights” (drilling fluids, e.g.) are the greater part of the mixture and where the “heavies” (drilling cuttings e.g.) settle fairly easily.

Continue reading »

written by GN solids Control \\ tags: , , ,

Mar 15

If you want to know why is removing solids from drilling mud so important, we can get more questions, but these questions help us to solve this question.

Firstly, we should know where is the solids from.

HA, when we drilling, the drilling mud take them out.

What is the mud’s function?

OK, so we get one more question, what the mud do in solids control system, i.e. what is the mud’s function. You can see How Drilling Mud Work In Solids Control System And Drilling Rig that I write before. I will list the main function again:

Remove cuttings from well
Suspend and release cuttings
Control formation pressures
Seal permeable formations
Maintain wellbore stability
Minimizing formation damage
Cool, lubricate, and support the bit and drilling assembly
Transmit hydraulic energy to tools and bit
Ensure adequate formation evaluation
Control corrosion (in acceptable level)
Facilitate cementing and completion

And then we can find the answer: We must get high quality drilling mud to ensure the drilling process.

COST of drilling mud and environment friendship

But why don’t we produce some new mud, here we go, I have the same question.

The answer is only one word—COST. The cost of produce new drilling mud is higher than this, it is just an economic choice.

Removing solids from drilling mud limit the cost and what’s more important, it’s good to the environment.

written by GN solids Control \\ tags: , ,

Mar 03

Drilling mud suction tank is the requirements of our client mud system second tank.The first tank :Oilfield shale shaker tank (1).

Details of the mud suction tank for the 1000HP drilling mud system.

500 bbls mud suction tank. three (3) compartment suction tank with two (2) 15’-6’’ long x 10’ wide x 8’ high suction

drilling mud suction tank

drilling mud suction tank

compartment and one (1) 8’ long x 10’ wide x 8’ high pill compartment mounted on a 40’ skid per above general spesifications and including:
top grating. includes tubing handrials and toe boards.
one (1) psi 10 hp mud agitator supplied and mounted in pill compartment.
one (1) psi 10 hp agrtator supplied mounted in each suction compartment.
three (3) 3’’ bottom mud guns with butterfly valves.
three (3) 10’’ butterfly valve clean-out gates – one (1) in each compartment.
two (2) 10’’ suction lines, one (1) for each mud pump.
mud pump to be capable of suching from any compartment.
one (1) mud lap on suction tank with 1’’ water tap.
8’’ suction line in each compartment of the suction tank for mud mix. Continue reading »

written by GN solids Control \\ tags: , , , ,

Dec 15

GN design drilling mud trip tank for petroleum drilling mud circulation system.GN mud agitators and centrifugal pumps are components for  the mud trip tank .With GN experienced engineers,our selection for the mud mixers and trip pumps are compatible for the trip tank.

Drilling mud trip tank definition

Drilling mud trip tank is a small mud tank with a capacity of 10 to 15 barrels, usually with 1-barrel or H-barrel

Mud Trip tank

Mud Trip tank

divisions, used to ascertain the amount of mud necessary to keep the wellbore  full with the exact amount of mud that is displaced by drill pipe. When the bit comes out of the hole, a volume of mud equal to that which the drill pipe occupied while in the hole must be pumped into the hole to replace the pipe. When the bit goes back in the hole, the drill pipe displaces a certain amount of mud, and a trip tank can be used again to keep track of this volume. Continue reading »

written by GN solids Control \\ tags: , , , ,

Dec 12

Description of drilling mud cleaning unit components installed,mud equipments appointment and the work are given below in the technological sequence.

Mud cleaning unit consists of the following parts

Mud cleaning unit

Mud cleaning unit


*Mud shale  Shaker;
* Hydrocyclone cyclone separator;
* Sludge pump;
* Float valve;
* Pipeline pressure;
* Suction pipe;
* Regenerative air heater;
* Electric control unit;
* Semi-weight;
* Tent shelter.

The drilling mud Cleaning unit performs the function of receiving drilling mud from the well and clean it from cuttings.

The mud cleaning unit first tank has three-section container consists of compartments, two of which have a height of 0,9 m and the volume of 4,5 m each, and the third – the height of 1,6 m and the volume of 9 m3. The design capacity of Uneven compartments was adopted based on the technological features of the Continue reading »

written by GN solids Control \\ tags: , , , ,

Dec 09

As drilling mud system manufacturer,some times we got inquiry for drilling mud materials.HDD mud materials,and oil gas drilling mud materials.

But we do not make drilling mud material,only drilling fluids recycling system,and equipments.

Below is the inquiry for drilling mud materials

Drilling Mud BENTONITE :
sodium base bentonite :
-yield point is(15 centipoises in (16) M3/MT)
in Concentration of approximately (6.5 g/100ml)
The API filtrate can be reduced to 15 ML and below the Moisture content shall be not exceed.
(10%) by weight, (2.5%) residue on A (200) mesh screen max. .Packaged in multi walled paper of 1000kg.

Drilling Mud CMC LV: Continue reading »

written by GN solids Control \\ tags: , ,

Dec 07

With GN mud Cleaner being more and more famous,now search “mud Cleaner” in Google.com,You’ll find GN mud cleaner products page rank Top 5.

See tech specs for :Drilling mud cleaner

Mud Cleaner Top 6 Rank in Google:

  • Oilfield Glossary: Term ‘mud cleaner

    Mud cleaners are used mainly with oil- and synthetic-base muds where the liquid discharge from the cone cannot be discharged, either for environmental or
    www.glossary.oilfield.slb.com › ResourcesOilfield GlossaryCachedSimilar
  • Mud Cleaners – Mud Control Equipment

    Mud cleaners were developed in the early 1970s to remove fine drilled solids from weighted mud without excessive loss of barite and fluid.
    www.mudcontrolequipment.com/pages/default.asp?p1=200 – CachedSimilar
  • MUD CLEANERS – Soli-Con: Solids Control, Mud Cleaners, Centrifuges

    Soli-Con carries mud cleaners that we believe offer top performance. The 20L touts a low maintenance, lubrication-free design. Coupled with the industry’s
    www.soliconequipment.com/mud.html – Continue reading »
  • written by GN solids Control \\ tags: , ,