{"id":3740,"date":"2020-10-01T02:46:11","date_gmt":"2020-10-01T09:46:11","guid":{"rendered":"http:\/\/oilfield.gnsolidscontrol.com\/?p=3740"},"modified":"2020-10-08T02:50:37","modified_gmt":"2020-10-08T09:50:37","slug":"daily-maintenance-of-drill-cuttings-dryer","status":"publish","type":"post","link":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/2020\/10\/01\/daily-maintenance-of-drill-cuttings-dryer\/","title":{"rendered":"Daily maintenance of drill cuttings dryer"},"content":{"rendered":"\n

GN Solids Control drill cuttings dryer<\/a> is widely used in drilling site oil-based mud non-landing projects. It is the core equipment for oil-based mud non-landing. In order to ensure the normal operation of GN Solids Control drill cuttings dryer, we use it daily During the process, attention should be paid to the maintenance and maintenance of the dryer to ensure that the drilling site operations are not affected.to make sure it can working with other equipment like decanter centrifuge<\/a> in drilling waste management system<\/a><\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

The GN Solids Control drill cuttings\ndryer must be started under no-load conditions. If it is started under load, it\nwill cause serious damage to the equipment and may even harm the operator.\nDuring the use of the schedule, a routine inspection of the drill cuttings\ndryer should be done every shift. The inspection content includes: 1. Whether\nthe dryer has abnormal vibration on site; 2. Whether the lubrication system has\noil leakage or other abnormal phenomena; 3 , Whether there is looseness in each\nfastening part; 4. Whether the slurry inlet and slag discharge port are\nblocked; 5. Whether the temperature of the main bearing is lower than 90\ndegrees during operation.<\/p>\n\n\n\n

\"\"
hdrpl<\/figcaption><\/figure>\n\n\n\n

In addition to daily inspections,\ndrill cuttings dryers must be inspected regularly after the machine has been\nrunning for a period of time. Regular inspections include: 1. Check the condition\nof the belt after every one thousand hours of operation, whether the tightness\nis moderate, whether it needs to be replaced for wear, etc.; 2. Check each\nconnection every time the operation exceeds one thousand hours or the vibration\nis excessive Check whether there is any looseness and check whether each sensor\nis working normally; 3. Clean the oil filter of the drill cuttings dryer with\nkerosene every 30 days, and check whether the oil quality needs to be replaced,\nand the longest use of the oil should not exceed 6 months; 4. Check the oil\nlevel every two weeks, and replenish new oil in time if the level is lower than\nthe standard level; 5. Regularly clean the slag outlet, flush the slurry outlet\nand the sieve blue, and check whether the sieve basket is damaged; 6. Regularly\nCheck the wear of the scraper, the sieve basket scraper and the sieve basket,\nand replace them if they are damaged.<\/p>\n\n\n\n

Welcome contact GN Solids Control<\/a> if you are interested about our product<\/p>\n","protected":false},"excerpt":{"rendered":"

GN Solids Control drill cuttings dryer is widely used in drilling site oil-based mud non-landing projects. It is the core equipment for oil-based mud non-landing. In order to ensure the normal operation of GN Solids Control drill cuttings dryer, we use it daily During the process, attention should be paid to the maintenance and maintenance … Continue reading “Daily maintenance of drill cuttings dryer”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[],"tags":[],"class_list":["post-3740","post","type-post","status-publish","format-standard","hentry"],"_links":{"self":[{"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/posts\/3740","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/comments?post=3740"}],"version-history":[{"count":0,"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/posts\/3740\/revisions"}],"wp:attachment":[{"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/media?parent=3740"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/categories?post=3740"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/oilfield.gnsolidscontrol.com\/index.php\/wp-json\/wp\/v2\/tags?post=3740"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}