GNZS703 shale shaker

General info. about

AOG 2011

• Show Name: Argentina Oil & Gas Expo 2011
• Show Time: 10^th to 13^th Otc 2011,14:00~21:00 p.m.
• Venue: La Rural, Buenos Aires, Argentina
• GN Booth number：Q12
• GN Booth Area: 38m2
• What GN show? GLW355X1250N high speed decanter centrifuge and GNZS70-3 linear motion shale shaker, etc, welcome to check our equipments during the show.

GN equipments and system can be used for the following projects:

1 HDD mud system

2 onshore drilling solids control system( oil & gas drilling, water well drilling, coal-bed methane drilling, geothermal well drilling,etc)

3 drilling waste management

4 liquid mud plant ( to prepare for clean mud)

high speed decanter centrifuge

What will be exhibited in the show?

For more info about AOG 2011, pls check GN website .

GN attends Argentina Oil & Gas Expo 2011 is a post from: Mud Solids Control Equipment

Related posts:

1. GN back from Brazil Offshore 2011 with success GN solids control attends Brazil Offshore 2011 in Macae last...
2. Mud agitator Manufacturer in Argentina This week GN shipped several sets of stainless steel mud...
3. Solids control equipments In Brazil Offshore Conference   GN solids control will attend Brazil Offshore Conference 2011...

Related posts brought to you by Yet Another Related Posts Plugin.

GN solids control in Brazil Offshore

 We met some clients and talking about proposal of drilling waste management system, decanter centrifuge, onshore and offshore drilling fluids treatment system, also we contact with big petroleum companies,drilling companies, oilfield service companies, also solids control equipments manufacturers in the world, such as Petrobras, BAKER HUGHES,TSC OFFSHORE, CPTDC, OIL STATES,NOV, Derrick, GE OIL&GAS,ETC.They are very interested in the products and service provided by GN, and hope to have further cooperation after the show.

 During Brazil Offshore 2011, we showed our main products including linear motion shale shaker, Balanced elliptical motion shale shaker, decanter centrifuge, centrifugal pump, desander, desilter, mud cleaner, vacuum degasser, mud gas separator, shaker screens and oilfield drilling rig solids control system & HDD mud system.

 If you are interested in GN solids control equipments and would like to meet us in the oil show, we could have a meeting in the following show.

1 For clients in South America, we can meet in AOG(Argentina) which is held on 10~13 October,2011.

2 For clients in Russia, we can meet in 11th Moscow International exhibition “Oil and Gas” held on 21th~24^th, June, 2011.

3 For clients worldwide, we can meet in OTC2012 held in TX, USA.

For detailed exhibition information and GN booth, we will public in GN website timely.

In the whole Latin America market, GN has exported many equipments since 2010, mainly used for drilling waste management industry and onshore drilling solids control system, also used for mud liquid plant to prepare drilling fluids and recycling drilling fluids from offshore and onshore drilling.

 For more information of GN products, pls check GN website.

GN back from Brazil Offshore 2011 with success is a post from: Mud Solids Control Equipment

Related posts:

1. Solids control equipments In Brazil Offshore Conference   GN solids control will attend Brazil Offshore Conference 2011...
2. Offshore drilling service company GN solids control produce mud recycling system/circulation system for both...
3. Drilling rig equipments in Brazil Brazil market is one of the largest market of oilfield...

Related posts brought to you by Yet Another Related Posts Plugin.

solids control system in Venezuela

Perhaps the most important thing to know about Venezuela is that it is an oil exporting country, the fifth largest in the world, with the largest reserves of conventional oil (light and heavy crude) in the western hemisphere and the largest reserves of non-conventional oil (extra-heavy crude) in the world.

GN manufacture complete line solids control equipments for the drilling rig( shale shaker, desander, desilter, mud cleaner, vacuum degasser, decanting centrifuge, mud pump, poor boy degasser, mud gun, mud agitator, mud mixer,mud tank), and we can provide a complete solution on drilling waste management( high G dryer, decanter centrifuge, screw pump, vertical cutting dryer, mud tank, etc). As government policy is more and more strict on environment related on drilling, our equipments are more and more important recently.

All of the foregoing sets the stage for showing just how extremely important the country’s conflict over oil is. At the most overt level, the conflict between the Chávez government and the oil industry is one about who controls PDVSA. Beyond that, the specific issues that control is being fought over have to do with the company’s efficiency, its internationalization program, its outsourcing and subcontracting practices, OPEC membership, and special oil contracts.

PDVSA, State owned company in Venezuela

PDVSA has a production capacity, including the strategic associations and operating agreements, of 4 million barrels per day (600,000 m³). Officials say production is around 3.3 million barrels per day (520,000 m³/d) although most secondary sources such as OPEC and the EIA put Venezuela’s output at least 500,000 barrels per day (79,000 m³/d) lower.

We have already Exclusive Agent in Turkey, Australia, and we are going to develop Agent in Argentina, Brazil within this year, now it is still under evaluation for the company profile, warehouse, strength, professional knowledge, etc. If you are interested, pls contact us to know the limits on GN distributor, and send your company introduction to us.

Solids control equipments distributor in Venezuela is a post from: Mud Solids Control Equipment

Related posts:

1. Cutting dryer decanter centrifuge in Venezuela GN decanter centrifuges are widely used in complete drilling fluids...
2. Solids control equipments In Brazil Offshore Conference   GN solids control will attend Brazil Offshore Conference 2011...

Related posts brought to you by Yet Another Related Posts Plugin.

 Function of Hole opener

 1. When drilling of the big hole is not possible because of the rig capacity.

2. When a satisfied penetration rate is not obtained in case of the big hole drilling, it is used after drilling with smaller bit.

3. When the hole direction most be controlled.

 Cutters of Hole opener

Several types of the cutter are

hole opener

 made available for various formations to be drilled, such as soft, medium and medium hard formations. Type SM for soft to medium formation,type MH for medium to hard formation and type XH for hard formation. For soft to medium and abrasive hard formations, the cutters with tungsten carbide tips are also available.

 Fixed Diameter Hole Opener

 Fixed Diameter Hole Opener is used to enlarge a hole or connected with a bit on front end to drill pilot hole and enlarge hole. Fixed Diameter Hole Opener is a general hole enlarging tool and is designed for enlarging holes onshore and offshore in oilfield during drilling. It is made of tough heat treated alloy steel for maximum strength. Cutter arms, equipped with removable cutter, are hardfaced and welded on body. The hole openers have three or six jet tubes with replaceable nozzles,so that jet streams quickly clean the enlarged hole.

 How to inquiry or order the hole opener in China?

You need to advice the following information.

1 Hole size

2 Pilot hole size

3 Top and bottom connections

4 Fishing neck and bottom neck length and OD.

5 Types of cutters (SM, MH, XH)

Hole opener manufacturer in China

1 Lilin Group, loaded in Tianjin city.

LILIN is the largest manufacturer of downhole drilling motor in Asia area. also famous manufacturer of drill bits in china. The company most significant value is our leading edge technolog ies and engineers that continually innovate and create update product to apply our technology to drilling situations.

2 Kingdream Public Limited Company located in Wuhan city

To know more about hole opener manufacturer in China or other drilling rig tools manufactures, pls contact GN solids control.

Hole opener manufacturer in China is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

How mud travels in hdd no dig system

The mud is born clean, it was mixed by bentonite and some chemical mixtures, then stored by a tank. Ready to go to the hdd no dig system. Then it was pumped to the pipe and to boring the hole, later it was bring back by the pipe to a storage tank with all the cuttings rocks and sands.
The mud recycling is needed now, the drilling mud with sands and drilling cuttings are pumped to the system, then the cleaned mud return to the pipe.
The mud recycling is usually including shale shaker, mud cleaner, or desander and desilter instead, sometimes decanter centrifuge is also needed. The drilling mud flow through the shale shaker, desander cones, desilter cones, then the decanting centrifuge.

All units within the range use two processes when cleaning mud to ensure the drilling fluid can be recycled and used to the efficiency of the first time it is pumped down the hole.

The first process is with the use of a shaker screen. When the mud is drawn from the hole it is first discharged onto a fine mesh, which constantly moves from side to side spreading the mixture across it. This allow the drilling fluid to fall through whilst larger items such as rocks and cutting remain on the mesh until they are shaken off its bottom edge and removed from the system.

The second process starts as the drilling fluid falls from the first mesh into the reservoir tank. The specially designed sloped tank causes a swell in the water, causing some sediment to drop and get caught in the sand traps, whilst the remaining fluid cascades over the dividing wall from where it is pumped into the desander cones. Under correct pressure and flow the cones remove as much sand as possible before discharging the sand onto a much finer shaker screen, where again anything larger then the fluid itself stays in the screen and is removed from the system, whilst the drilling fluid falls through this and the original screen back into the reservoir tank.

What GN Supply for HDD no dig system

GN Solids Control is a professional company of mud recycling for hdd no dig equipment.GN can supply all kinds of shale shaker, mud cleaner, decanter centrifuge, and so on.

HDD Companies All Over the World Chose GN

GN Solids Control is very professional at mud recycling system of hdd, just a few days ago, a Korean customer buy one from us, and you can see it in our company news GN 400GPM Complete Mud Recycler to Korea, there are even more supprises.
No dig mud recycling equipment to Korea HDD contractor
No dig mud recycling equipments have finished well and prepared to be delivered to Busan, Korea.
The whole no dig mud recycling equipments is designed for this client specially including GNZJ83-2 mud cleaner, portable SLH150-30 Jet mud mixer, Mud tank, SB5x4-13 Sand pumps and separated shale shaker GNZS83-2. The Korean HDD contractor uses the equipments for their HDD contract.
Vermeer HDD rig mud recycling system to Indonesia

An Indonesia HDD (Horizontal directional drilling) contractor purchased a complete  HDD rig mud recycling system for their Vermeer HDD rig.Now the drilling mud recycling system is ready for delivery in GN China factory.

The Indonesia Customer visited us for  inspection,and they are satisfied with our mud recycling system for them,and also ordered Two additional submersible slurry pumps for their drilling application.

Even more news from GN Solids Control

mud recycling system for hdd boring is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Firstly, we should know where is the solids from.

HA, when we drilling, the drilling mud take them out.

What is the mud’s function?

OK, so we get one more question, what the mud do in solids control system, i.e. what is the mud’s function. You can see How Drilling Mud Work In Solids Control System And Drilling Rig that I write before. I will list the main function again:

Remove cuttings from well
Suspend and release cuttings
Control formation pressures
Seal permeable formations
Maintain wellbore stability
Minimizing formation damage
Cool, lubricate, and support the bit and drilling assembly
Transmit hydraulic energy to tools and bit
Ensure adequate formation evaluation
Control corrosion (in acceptable level)
Facilitate cementing and completion

And then we can find the answer: We must get high quality drilling mud to ensure the drilling process.

COST of drilling mud and environment friendship

But why don’t we produce some new mud, here we go, I have the same question.

The answer is only one word—COST. The cost of produce new drilling mud is higher than this, it is just an economic choice.

Removing solids from drilling mud limit the cost and what’s more important, it’s good to the environment.

Why is removing solids from drilling mud so important? is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

First,search desander manufacturer in Google.com, with keywords like below:

• Desander manufacturers
• Desander companies
• Desander supplier
• Desander for sale.

Resuilts for “desander” in Google search:

1. desander,hydrocyclone desander,China desander desilter manufacturer

   - [ Translate this page ]

   Hydrocyclone desander manufacturer,oilfield desander with good cones,buy solids control drilling mud fluids desander from China supplier for sale.
   www.gnsolidscontrol.com/desander/ – Cached – Similar

2. VCG Overview

   Visualization of Compiler Graphs. Overview. Description · Windows Availability · Features · Examples · Availability · Mailing List · Publications …
   rw4.cs.uni-sb.de/~sander/html/gsvcg1.html – Cached – Similar

3. GN mud desander-Hydrocyclones

   24 Aug 2009 … GN mud desander-Hydrocyclones. Hydrocyclone desander manufacturer,oilfield desander with good cyclones,buy solids control drilling mud …
   www.prlog.org/10320378-gn-mud-desanderhydrocyclones.html – Cached – Similar

4. [PDF]
   

   DSR Desanders

   File Format: PDF/Adobe Acrobat – View as HTML
   The Fluid Systems, Inc. desander units are the result of an intensive research and development program initiated in 1950. Designed by Krebs Engineers, each …
   www.fluidsystems.com/pdf/DSR%20Desanders.pdf – Similar

5. Sell desilter desander

   We are desilter and desander China manufacturer,we sell desilter and desander worldwidely. Learn more: Desilter and desander. As a solids control.
   oilfield.gnsolidscontrol.com/sell-desilter-desander

Second way,use the industry yellow pages,or directory find a packages of desander companies list:

Desander manufacturers company list is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

GN make centrifugal shearing pump for drilling mud solids control system.

A	CENTRIFUGAL PUMP (6″ x 8″) shearing pump (For Shearing of Mud Chemical)
1	CENTRIFUGAL PUMP	Nos	2
	Capacity              – 1000 GPM @ 100 FT Discharge Pressure
	@ 22 PPG
	Size                       – 6 x 8 R
	Shaft Size            – 1 7/8″
	Impeller Size         - 12″
	Motor                  – 100 HP, 1500 RPM, 3 Phase, 400 V, 50 HZ
	Classification       - Explosion Proof
	Note                 – Starting Motor To Be Soft Start System
	SPARES FOR CENTRIFUGAL PUMP
9	Shaft	Nos	4
10	Impeller (12″ Dia)	Nos	4
11	Wear Plate	Nos	4
12	Bearing	Nos	16
13	Housing	Nos	2
14	Oil Seal	Nos	16
15	Gland Packing	Nos	3

JQB series Shear Pump is a special purpose equipment of solids control system which can meet all customers’ requirements of preparing dilling fluid for the well drilling system. This shear pump manufactured by GN company is used to treat the high property mud, make the mud to obtain good rheological properties and cut the drilling cost as much as possible. This ideal solids control equipment designed by GN’s engineers has  high performance and gained customer’s high evaluation.

Awaiting your reply for the Centrifugal pump for shearing of drilling mud Chemical and thank you for your continue support.

CENTRIFUGAL PUMP For Shearing of Mud Chemical is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

• Drilling fluids shale shaker

In 13 oil wells, 5 wells use ZS2×1.15×2/3P low-frequency shale shaker, two wells teams using QGZS-G4 Ⅱ high frequency shale shaker, six wells teams using the DHL-1 high-frequency shale shaker. Accounted for using the number of high-frequency screen 61.5%, compared with last year have more greatly enhanced. One QGZS-G4 Ⅱ high-frequency shale shaker for the newly introduced, are used in good condition.

• 2, Desander

In 13 oil wells, 5 wells teams using the NCS-300 × 2-type Desander, two wells teams using ZCSQ-250×2-type Desander, six wells teams using the ZQJ-250 ×2-type Desander; accounting for the use of the number of 38.46% and 15.39%, 46.15%. Compared to last year, not the magnitude of changes, only to add two new Desander use.

• 3, Sand pump

In 13 oil wells a total of 12 teams use the SB-200 wells electric sand pump, a well teams using the SB-6″×8″ electric sand pump. Compared with last year, out of the belt transmission-type sand pump at the same time, the introduction of a new type of mechanical seal type sand pump.

• 4,Decanter centrifuge

After many years of practical use and continuous upgrading of the decanter centrifuge has been raised from a variety of models of multiple manufacturers into a relatively neat two manufacturers of the three models (which LW450×1000-NJ-type centrifuge at the end of March 2003 to replace eliminated); separation factor reached 800 or more, speed at 1800r/min above are more capable in  separating Sand, but also  facilitate equipment maintenance and management.

Shakers desanders pumps centrifuges in 13 oil wells is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.