Jun 03

Different country has different special requirement on drilling rig mud system for oil drilling. GN Solids Control can offer different special requirement on equipment which can satisfy most of customer’s request.   GN Solids Control can offer drilling solids control mud system with IEC EX/ATEX/CE certificate. Besides, GN can also accept BV or DNV third party inspection. Recently, we exported one set 1000HP drilling rig mud system to Europe company with CE & ATEX certificate. The mud system have configuration as below:

  • Two(2) sets Drilling Mud Shale Shaker, GNZS703HB, with customized orange color and LOGO
  • Two(2) sets Drilling Mud Vacuum Degasser, GNZCQ270A, with customized orange color and LOGO
  • Four(4) sets Drilling mud storage tank, with customized white color and LOGO

drilling mud shale shaker

Continue reading »

written by GN solids Control \\ tags: , , ,

Aug 02

Why we should have drill slurry storaged? Mainly it is because of the reasons below:

(1)   Requirement for the carriage and storage of mud on mobile drilling units has increased over the years, it is not convenient to process the drilling mud at the platform, you have to collect the used drill slurry and carry it to drilling fluids plant for process, then recycle the clean drill slurry and disposal the useless cuttings, so that it will not influence the environment.

Drill Slurry Storage

Drill Slurry Storage

(2)   Clean drill slurry should be storaged for use, for drilling , for mixing , for lubricate the drill bit.

(3)   Useless drill cuttings should be collected and storage, then carried to drilling waste management system for process.

GN solids control manufacture drill slurry storage tank for various application, with necessary mud agitators, mud gun, centrifugal pump and mixing hopper. We can produce mud storage tank together with solids control system or separately. Compared with shaker tank and intermediate tank, the pipeline of storage tank is much simple, if required by the clients, we will divide it into several compartment by clapboard. Sometimes mud ditch is installed on each compartment. Handrails, stairs, cleaning gate, valves are included, but walkways are not included. There is flexible hose connected 2 tanks.

Continue reading »

written by GN solids Control \\ tags: , , , , , , , , ,

Oct 05

Pill tank is a section in the mud suction tank which is used for heavy mud mixing and conditioning ( slug tank).

150bbl Pill Tank specs:

pill tank

pill tank

  • Active Capacity 150 BBL—Single 150 BBL Compartment
  • Dimensions: Length 26’ 6” x Width 7’ 9” x 10’ Height Weight: 22,000 lbs
  • Construction: Three runner oilfield standard design
  • Top Rail Height: 36” swing down for transport
  • Internal ladder rungs with removable walkway for tank access
  • Mix/Transfer pump: 8x 6x 14 w/ 75 hp
  • Power Requirements: 460V/60HZ or 380V/50HZ, 3phase
  • Two Tank Agitators: 15 hp with shaft stabilizer
  • Shear pump: 60HP
  • Mixing Hopper: Flow Process Technologies 6” High capacity
  • Mud Guns: Two 2” mud guns

GN solids control can produce all of the above and provide complete solution, not limit to trip tank, mud suction tank, recycling tank, mud agitator, mud gun, centrifugal pump, shale shaker, mud cleaner, decanter centrifuge, etc complete solids control system.

Continue reading »

written by GN solids Control \\ tags: , , , , , , , , , , , ,

Apr 15

GN solids control produced various kinds of mud tanks for oilfield drilling and water well drilling, including swab tank, storage tank, fuel tank, water tank, mixing tank, suction tank, pill tank, trip tank, mixing tank, intermediate tank, shaker tank etc.

General features of GN mud tanks

oilfield swab tank

oilfield swab tank

1 Customized dimension

2. Sand Blast Treatment before painting.                                                                                            

 3. Two pack Epoxy zinc(Japan Kansai & Cosco brand)                                                                                    

4. Two Pack Epoxy hi-build containing anticorrosive pigmentstwice.                       

5. Surface pigmented with high quality light fast PU pigments

6 Stainless steel material tank available

7 Skid Mounted 3 Runner Oilfield Design

8 Proper mud agitator and mud guns are available

9 Mud tank accessories included

Oilfield Swab tank

Also called test tank, each plumbed for separate discharge to vacuum truck or water tank. Complete with minimum 32 ” Poor-Boy Degasser with proper vent, fluid leg and inspection hatch. Usually we will provide a complete sets of measurement tools, including Mud Balance, Plastic Marsh Funnel Viscometer and Plastic Measuring Cup and Stopwatch.

Oilfield trip tank

A small mud tank with a capacity of 10 to 15 barrels, usually with 1-barrel or h-barrel divisions, used to ascertain the amount of mud necessary to keep the wellbore full with the exact amount of mud that is displaced by drill pipe. When the bit comes out of the hole, a volume of mud equal to that which the drill pipe occupied while in the hole must be pumped into the hole to replace the pipe. when the bit goes back in the hole, the drill pipe displaces a certain amount of mud, and a trip tank can be used again to keep track of this volume.

Continue reading »

written by GN solids Control \\ tags: , , , , , , , , ,