Apr 17

Oily sludge is difficult to reuse because it is mixture of waste solids, oil and water. If not treatment, Oily sludge is hazardous to environment, may contaminate the soil, water and air. The oily sludge can be from refinery, drilling waste or tank cleaning etc. From technology, if the oily sludge can be separated to oil, water and solids, the separated oil can be reused or resell, the separated water can be used for green or project.  After well separation, the oily sludge can be effectively become useful material.

oily sludge treatment

Continue reading »

written by admin \\ tags: , ,

Oct 22

GN Solids Control is the first China drilling waste management equipment company who can offer total solution  equipment for drilling waste management Service Company.

2015.10.23 GN total solution for drilling waste management

Regarding Oil based mud drilling cuttings, the total solution of drilling waste management including below steps:

Step 1: Vertical cuttings dryer. Use this VG dryer to treat the drilling cuttings, recover the valuable oil based mud. The OOC after treatment can be 3%-5%.

Step 2: Thermal Desorption Unit. After VG dryer, the solids can go to TDU for non-hazardous final treatment. After TDU, the water, oil and solids can be separated in accepted degree which comply with most of country’s government policy on environmental protection

Step 3: Decanter Centrifuge. After VG dryer, the liquid part (drilling fluids) can go to centrifuge to remove the fine solids and go back to active mud tank for reuse. Some client let the liquid part discharged from VG dryer go back to active mud tank system directly. This is also OK.

Continue reading »

written by admin \\ tags: , , , , , ,

Oct 15

GN Solids Control just receive order from waste management service company (call this client WMSC for short in below chapter). WMSC is waste management service company with many years jobsite experience, their main client is CNPC and SINOPEC. With China new policy on environmental protection, WMSC is faced with booming business project with CNPC & SINOPEC, requiring more waste management equipment to support their project.  As China leading manufacturer for solids control equipment & waste management equipment, GN Solids Control definitely become their main supplier.

Dual centrifuge system for waste management

WMSC already use our decanter centrifuge & vertical cuttings dryer & high G dryer for over 2 years for waste management project. They give high praise on GN equipment. Pls see more details of below.

Continue reading »

written by admin \\ tags: , , , ,

Aug 11

GN Solids Control Verti-G dryer (vertical cuttings dryer) is verified high quality products in many drilling rig site, like Shell jobsite, Baker Hughes drilling site etc. Even compared with CSI vertical cuttings dryer, in some bad mud cuttings conditions, GN Solids brand Verti-G dryer can also work in high performance. This is also the technology accumulation with many years research, test and jobsite experience.

Last year, we have exported over 10 sets verti-G dryer with screw conveyors to Middle East, the main client is NIDC. As Iran government strict policy on environment protection, GN Solids Control have a big chance to match large quantity of verti-G dryer with screw conveyors for NIDC drilling rigs.

hdr

One package of verti-G dryer with screw conveyors including below items:

Continue reading »

written by admin \\ tags: , , , ,

Jul 30

Every year we have big budget for oil & gas drilling show which include solids control equipment exhibition. This year, we also attend many oil equipment exhibitions in different countries and areas.

1) Nigeria oil & gas exhibition in March.

Nigeria is leading country in oil drilling field in West Africa. We have lots of valuable customer there. The main customer business is to offer solids control service or drilling waste management service with centrifuge, vertical cuttings dryer & high G dryer. There are also some drilling companies with several land drilling rigs who service themselves with GN Solids Control equipment directly.

Nigeria oil & gas exhibition NOG, holding in capacity city Abuja, is attracting more and more visitors every year. GN Solids Control take waste management decanter centrifuge there.

2015.7.30 centrifuge for oil show

 

Continue reading »

written by admin \\ tags: , , ,

Jul 17

GN Solids Control is supporting company for oil gas drilling & drilling waste management field. As leading manufacturer for solids control equipment & waste management equipment, every year we give best support to over 10 big projects in domestic market and over 10 sets big projects in overseas market.  GN mud centrifuge, Vertical cuttings dryer, solidification unit, Thermal Desorption unit are the key equipment for drilling waste management / oily sludge treatment.

Recently, we have one overseas customer with 4 projects requirement:

– 1st Project:

Treatment of old drill cuttings waste pits – 3000 M3/ waste pit (mixture of OBM & WBM) using solidification process or by a better treatment process such s Thermal Desorption process.

Client Goal: OOC < 5%

GN proposal: we offer 1 sets solidification unit to reach client goal.

2015.07.17 solidification unit

Continue reading »

written by admin \\ tags: , , , ,

Jun 22

GN Solids Control has one set mud tank with dual Hi-G drying shaker for drilling waste management ready for dispatch. The mud system is mainly used to treat the water based mud drilling waste discharged from shale shaker, desander cyclones & desilter cyclones. The customer is China subsidiary company of CNPC, with many years oil service / mud treatment experience.

Configuration of the dual high G drying shaker mud tank system.

dual high G drying shaker mud tank system 1

1) 2 sets of high G drying shaker, GNZS594HGE-LD. This high G drying shaker with 2 ea US / Italy vibration motor, with 4 panel composite material shaker screen, which is replacement for Swaco Mongoose shaker screen, with low profile feeding hopper type feeding box. Other technical specs as following:

Continue reading »

written by admin \\ tags: , , , ,

May 15

Yesterday, GN Solids Control dispatch a big batch of solids control centrifuge & vertical dryer, with pumps, screw conveyors, spare parts etc, totally by 7 12meter long vehicles. The customers is international drilling company with large quantity of land rigs & some workover rigs. After tested GN centrifuge in jobsite, this old customer buys more and more solids control equipment package from us from last year.

For this order, the detail of purchase order is below:

1) 6 sets decanter centrifuge, which will be used for 3 rigs. The centrifuge will be used for barite recovery and mud weight cutting. GN Solids Control centrifuge learn and upgrade many highlights from Alfa Laval, the good frame centrifuge brand from Germany. Now, we have upgrade to 3rd generation centrifuge. The price is good and performance is much better than before.

decanter centrifuge for drilling

 

Continue reading »

written by admin \\ tags: , , , ,

Apr 22

Oil price is going down from end of 2014, many drilling rigs stop to drill, thus lead to the equipment suppliers go down of the sales amount, like rig companies, solids control companies, pipes, drill bits etc. However, the drilling waste management field is still strong. We have to support our company with drilling waste management equipment sales this year and also extended to other fields, like horizontal directional drilling, core drilling, mine drilling, diamond drilling etc.

Recently, we just finish one set skid mounted waste management total solution for on line drilling waste management, water based mud. The customer use the Hi-G dryer and centrifuge system to treat the drilling cuttings discharged from shale shakers and recover the useful water based mud and reduce the impact on the environment.

hi G dryer and centrifuge system

1) Hi-G dryer and centrifuge system

Continue reading »

written by admin \\ tags: , , , ,

Jan 13

Drilling company generally rent drilling waste management equipment from third party solids control & drilling waste management service company. But some oil company with drilling subsidiary may also have solids control & drilling waste management service subsidiary. In short, they are one group company who can do the drilling & solids control & drilling waste management.

GN Solids Control is a top manufacturer from China who can supply solids control & drilling waste management equipment. With annual sales amount of over 200 sets centrifuge & over 20 sets vertical dryer this year, GN Solids Control is a shining star in oil drilling field. Recently, we have customer who buy Three(3) sets Vertical Cuttings Dryer with three(3) sets dryer skid for Drilling waste management.

GN VERTICAL CUTTINGS DRYER

Vertical cuttings dryer user process

Continue reading »

written by admin \\ tags: , , , ,