What is Air Diaphram pump?

diaphram pump

An Air Diaphram pump is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable non-return check valves to pump a fluid. Sometimes this type of pump is also called a membrane pump.

Air Diaphram pump features:

• have good suction lift characteristics, some are low pressure pumps with low flow rates; others are capable of higher flows rates, dependent on the effective working diameter of the diaphragm and its stroke length. They can handle sludges and slurries with a relatively high amount of grit and solid content.
• suitable for discharge pressure up to 1,200 bar
• have good dry running characteristics.
• are low-shear pumps.
• can be used to make artificial hearts.
• are used to make air pumps for the filters on small fish tanks.
• can be up to 97% efficient.
• have good self priming capabilities.
• can handle highly viscous liquids.
• are available for industrial, chemical and hygienic applications
• cause a pulsating flow that may cause water hammer

Attention during operation:

 Before any maintenance or repair is attempted, the compressed air line to the pump should be disconnected and all air pressure allowed to bleed from the pump.Disconnect all intake,diacharge and air lines.Drain the pump by turning it upside down and allowing any fluid to flow into a suitable container.

 Extended technical resources provide information about diaphragm technology and products，pls contact GN solids control.

Air Diaphram pump is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

 1 Brazil

Brazilian oil deposits below a layer of salt in the Atlantic Ocean hold at least 123 billion barrels of reserves, more than double government estimates, according to a university study by a former Petroleo Brasileiro SA geologist.

oilfield drilling equipments

 2 ColombiaColombia is currently one of the friendliest South American countries in terms of oil and gas regulations and royalties.

 In 2003, Colombia’s National Agency for Hydrocarbons (ANH) created a new energy policy, the state-owned hydrocarbon company, to compete with other oil and gas companies for exploration and production contracts.The new policy also allows private companies such benefits as 100% ownership upon exploration success.

 3 Ecuador

Ecuador produces more oil than it needs for domestic consumption and thus it is one of the country’s leading exports. Therefore, any new drilling for oil is not intended to meet local demand but is intended for export overseas, most likely to Japan and the United States.  Beneath the surface in eastern Ecuador and within the Amazon rain forest, are large amounts of oil.  Critics warn that the habitat could suffer either through the direct spilling of product and soil contamination or through the opening of the area to the outside through the building of roads.

 Due to the drilling activities in Latin American, environment protection should be on the way right now. A plenty of drilling mud recycling system and drilling waste treatment system are urgently demand.

 GN solids control provide various of drilling equipments and drilling mud recycling system for oilfield.

Advantages of using drilling mud equipments in oilfield

1 recycling drilling mud to used for drilling rig, it can save considerable drilling cost

2 Environment protection

 After treated by drilling mud equipments, the solids can be trucked away, some are used for construction landfill, some are used to Brick production

3 recycling barite

 It is an important material for drilling fluids, which can keep the mud balance

4 extend the service life of rig

5 extend the working time of other related drilling tools

 For more oilfield drilling equipments in Latin American, pls check GN solids control.

Oilfield drilling equipment in Latin American is a post from: Mud Solids Control Equipment

Related posts:

1. Offshore drilling service company GN solids control produce mud recycling system/circulation system for both...

Related posts brought to you by Yet Another Related Posts Plugin.

The workover rig mud system is usually contains shale shaker, decanter centrifuge, and mud tank. The desander and desilter is optional, it depends on the environment you faced.

As you may have noticed, we have send the work over rig mud system to two different place, Indonesia and Kazakhstan. South, North,and Middle of the earth, hot and cold. GN Solids Control can supply all the equipments customized, wherever you are, Indonesia or Kazakhstan, south or north of the earth,or you are in the coldest area or hottest area, you need, and GN do it, what’s more, do it perfect!

Benefits of Choosing GN Workover drilling mud system

Customized Design Equipment: As we can see, we produce you wanted, just for you!

Simplicity and Useful: Simplicity is the essence of GN Solids Control, and we made equipments useful!

User Friendly: Very easy and safe to use all the solids control equipments, we always considering our user even when choosing the leaders.

Environment Friendly: Be friendly to the environment is very important in drilling, to keep the world beautiful.

Workover Rig Mud System is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Four phase mud cleaning equipment

• Shale Shaker

Shale Shaker is the first and most important equipment for drilling mud cleaning.This clenaing equipment separate

Mud Cleaning Equipment

particle size usually above 70mirons.
We provide both linear motion shale shaker and balanced elliptical motion shale shaker.

• Desaner/Desilter/Mud Cleaner

Desander with 10inch cones,or 8inch cones,or 12 inch cones act as the second phase drilling mud cleaning equipment.We have customized number cones desander for clients.Desander cleaning mud usually between 47-76microns.Desilter with 4inch cones,or 5inch cones,act as the third phase mud cleaning equipment.Which clean out particles 15-45microns.Mud cleaner is a combination of desander & desilter and with underfluids bottom shale shaker,which act as both desander and desilter function.Mud cleaner manimum footprint of the equipments,and has big capacity for mud cleaning and treatment.

• Decanter centrifuge

Decanter centrifuge is the fourth phase mud cleaning equipment,GN have both mildle speed,and hight speed,as well as virable speed decanter centrifuge available for mud cleaning.

Why choose GN mud cleaning equipment?

Competitive Price Quality Ratio

A)Outsourcing Parts: Principle “Quality First, Price Second”

Steel: National Standard Steel From Top Company(HBIS)
Machine Components: Only Famous Brand (OLI Vibrating Motor &Yuanda Valve)
Link Bolts: SS304 Material
Electrical Components: SIEMENS/Schneider/ CHINT
Coating & Painting: (Kansai & Cosco) brand epoxy zinc-rich anticorrosive paint
Note: Or Select Marching Components per clients requirements

B) Compele Line Equipments.

GN  System: Design & manufacture complete line mud cleaning equipments for a total system which ensures better integration of system and competitive price.
GN Main Equipments: Shale Shaker, Mud Cleaner ,Desander ,Desilter, Centrifuge, Agitator, Mixing Hoppers, Flare Igniter, Various Tanks, Pumps, Degassers etc.
GN Main Spare Parts for mud cleaning system: Shaker Screens, Hycdocyclone Cones, Rig Mat, Pipe Rack , Unions etc.

GN Mud Cleaning Equipment is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

rig matting boards

The following is an inquiry from clients for rig matting boards:

Please provide your best prices, availability, delivery period & payment terms for the Following items.

Learn more about:GN Solids Control

Rig Matting Boards:

8 ft width x 20 ft length by approximately 6 inch height.

Wood matting with welded metal frame, 3 runner design.

Complete with recessed handling rings

Qty : 105 each

Also advise Freight Charges to Dubai, UAE separately.

Your Offer for the same is expected at the earliest  with specifications.

Our proposal:

Remarks on technique standard for drilling rig mat boards:

1. 1. Weld joint should be continuous and smooth, the weld angle should not be less than 6mm
2. 2. Diagonal dimension tolerance should not be more than 1‰

Material list for the rig matting boards

oilfield rig matting boards manufacturer is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

HDD drilling rig

t China large HDD drilling rig manufacturer info. with our clients.

Lianyungang Huanghai Machinery Factory Co., Ltd. is a large-scale key enterprise in the industry of geological exploration field. Founded in the year of 1969, the factory belonged formerly to Ministry of Geology and MineralResources of China. Huanghai Machinery Facotry Co.,Ltd  is now a separate legal personality shareholding enterprise. Equipped with more than 40 years professional manufacturing experience and professional production team as well as more than 700 excellent skillful workers, more than 50 experienced engineers and more than four hundred sophisticated equipments, the high quality drilling equipments will be manufactured and supplied to our customers in the eighty thousand square meters area of working shops in the factory.

Lianyungang Huanghai Machinery Factory Co., Ltd Market

At present, Huanghai Machinery is the largest manufacturer in the geological exploration field in China, with the most variety of products and the largest market share in China. Lianyuangang Huanghai Machinery Factory Co.,Ltd  products have been exported to more than twenty countries and regions, such as Canada, Australia, Turkey, Iran, South Africa and Russia and also the countries in Asia and South America.

Visit website of:Lianyuangang Huanghai Machinery Factory Co.,Ltd

Lianyungang Huanghai Machinery Factory Co., Ltd-HDD rig is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

We offer drilling rig mud system package

land drilling rig

There will be Tender coming from Oil India Ltd. in one and a half months’ time.  This tender is mainly for buying a 2000 HP Diesel Electrical Land drilling Rig with 1000 KBPS Mast and Substructures conforming to API 4E or 4F with optional VFO and also one 750 HP Mobile drilling Rig.  The specification is under preparation.

Customer have put a restriction that they will prefer a company who has 15 years API Certificate in offering drilling rigs.

The local job of the  Diesel Electrical Land Rig and mobile rig can be arranged by us to reduce the cost.

As a Drilling rig mud system manufacturer,we are looking forward to cooperating with Diesel Electrical Land Drilling Rig and mobile drilling rig manufacturers to go for the tender.

If you are interested please contact GN Solids Control.

Diesel Electrical Land Drilling Rig is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Drilling mud trip tank definition

Drilling mud trip tank is a small mud tank with a capacity of 10 to 15 barrels, usually with 1-barrel or H-barrel

Mud Trip tank

divisions, used to ascertain the amount of mud necessary to keep the wellbore  full with the exact amount of mud that is displaced by drill pipe. When the bit comes out of the hole, a volume of mud equal to that which the drill pipe occupied while in the hole must be pumped into the hole to replace the pipe. When the bit goes back in the hole, the drill pipe displaces a certain amount of mud, and a trip tank can be used again to keep track of this volume.

Shaker mud tank

The mud tank adjacent to the shake shaker, usually the first tank in to which mud flows after returning from the hole. Also called a shaker pit.

GN manufacture not only full package mud system,but also independent components and equipments for solids control,like mud mixing tank,mud agitators,trip tank,trip pump etc.

Mud trip tank for drilling mud system is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Land Rig mud system Packages

Drilling rig mud system

We deliver complete, integrated mud system packages for installation on land rigs. Our focus is on delivering custom-designed products and a quick and cost-effective mobilisation and demobilisation process.

Offshore Drilling Rig mud system Packages

We offer a range of world class drilling fluid systems for installation on new builds or upgrades of existing offshore rigs including jack-ups, semis and platforms.

Drilling Mud Equipment

GN Drilling Mud engineers and manufactures a range of drilling fluid systems and equipment. All products are available either as stand-alone products or as part of a bigger package.

Drilling rig mud equipment independent Equipment
* Drilling mud Shale Shaker
* Drilling mud Cleaner
* Fluids Desander
* Fluids Desilter
* Mud Decanting Centrifuge
* Vacuum Degasser
* Sand Pump
* Mud Gas Separator
* Jet Mud Mixer
* Mud Agitator
* Shear Pump
* Submersible Slurry Pump
* Flare Ignition Device
* Mud Gun
* Mud Tank
* Oilfield Equipment Parts

GN Solids Control mud system match for Chinese ZJ series drilling rig.

Drilling rig mud system package is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Vemeer China VBM Company,  is Balama VBM : Vermeer Beijing Manufacture Joint venture Vermeer USA with Balama China

HDD rig

As per our comunication before I want to inform below :
Now we have Vermeer HDD D130X150, this rig made from Vermeer Beijing Manufacture (VBM), joint venture vermeer and balama china, (www.balama.com). We use drill pipe : vermeer Firestick One Piece Drill Rods 88.90 mm x 6.09 meters.

I want to buy DCI Eclipse SST complate, but some of pieces equipment and tooling must be required for operation of the SST. Such as :
1. Non-magnetic housing for SST transmitter
2. Monel (non-magnetic drill rod) approximately 15 ft (3 m) long for use between the nonmag housing and the first drill rod. A second monel may be required if you are using a mud motor.
3. Mud Motor and Tricone Drill Head

Kindly you help me for check the spare parts and pricing in China by Vermeer Beijing Manufacturer?

Vermeer Beijing Manufacturer-Drilling rig HDD is a post from: Mud Solids Control Equipment

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.