Sand management is very important on oil and gas drilling, it effects the the drilling work, oil and gas production.
On the drilling work, the sand management is always referred as solids control system. Because the sand manage equipment is mainly a desander, and is a part of solids control, and if we want to have a excellent result, we must combine shale shaker, decanter centrifuge and so on.
Desanding the oil product is also important to make the oil clean. And thus desander is a very important part of it, and there are a lot sand control companies to do this.
written by admin
\\ tags: desander, desanding, sand management, sand monitor
Drilling fluid cleaner also means mud cleaner, or drilling mud cleaner, and the cones, hydro-cyclone cones is the main part of the drilling fluid cleaner.
Drilling fluid cleaner (mud cleaner) is a combination of desander, desilter and shale shaker, and the differences of desander and desilter is the dimension of mud cleaner cones, usually the cone diameter is more than 6″is called Desander, and used as the second-control equipment in drilling operation. We commonly used 8 “and 10″ cones desander to separate solid-phase particle size 47-76μm in the drilling fluids. And usually the cone diameter is less than 6″is called Desilter, and used as the third-control equipment in drilling operation. We commonly used 5 “and 4″ cone to separate solid-phase particle size 15-47μm in the drilling fluid. Based on customer requirements and capacity, we can select groups of cone into Desilter.
Continue reading »
written by admin
\\ tags: desander cone, desilter cone, drill fluid cleaner cone, drilling fluid cone
The desander and desilter are important parts of solids control system, and the hydrocyclone cones is the key component. Here is the detailed introduction of the cones design, the use and ability of desander desilter cones, and then I introduce you the manufacturers of desander cone and desilter cones.
Desander desilter cones design
The desander cone and desilter cones all are also referred as hydrocyclone cones, cones are basically separate the solids from drilling fluids. The separation process is carried out by employing centrifugal forces. The Cones are made of high durameter polyurethane with optional steel inserts, which ensure consistent productivity.
cones in desander
Continue reading »
written by GN solids Control
\\ tags: desander cone, desander desilter, desilter cones, hydrocyclones
Bentonite desander is a very important part of Bentonite Mud Recycling Equipment, also refered as solids control system. The Bentonite desanders are used in treating and straining bentonite slurry after the shale shaker which is always the first phase solids control equipment. And the desilter and decanting centrifuge separate solids particles during the bentonite mud recovery process after the bentonite desander.
hydrocylone bentonite desander
Continue reading »
written by GN solids Control
\\ tags: bentonite, bentonite desander, desander, Solids control
