GNMS-500D mud system is economic standard offer for diamond drilling rigs / gold exploration clients. With this unit, the solids in millimeter level can be removed out 98%, and 100microns to 1mm can be removed 64%, and 2microns to 100microns can be removed 25%. GNMS-500D mud system is 2 phase separation unit with shale shaker & desander cones. If the user wants to remove more fine solids, other equipment is required to get better performance.
We can do below improvements based on GNMS-500D mud system.
Continue reading »
written by admin
\\ tags: centrifuge, mud cleaner, mud system, mud tank, pump
GN Solids Control mud tank system is widely used in many countries and areas. Some oil drilling contractor may buy one complete mud tank system with 3 to 7 mud tanks; some third party service company may buy one or tank mud tank system professional for intermediary use.
Recently of 2014, we sell one mud tank system with single mud tank & 2 mud agitators & 2 mud guns to Middle East, the customer is locally strong oil service group company with solids control service branch & drilling waste management service branch. They have CD518 High Speed centrifuge, 414 low speed centrifuge (used for barite recovery system), Shale shakers, Minimum shear mixing tanks, Oil separation equipment, Oil separation equipment etc.
Hi-G dryer shaker
Early of 2014, the customer buys 3 Hi-G dryer shakers from GN Solids Control. They use the Hi-G dryer shaker for water based mud drilling cuttings treatment. The Hi-G dryer shaker with four panel shaker screen which is replacement for Swaco Mongoose shaker. They customer can buy enough shaker screen from us in stock for their projects; or they can source it locally for urgent use.
Single mud tank system
After the Hi-G dryer shaker purchase order, the customer issue one more order for single mud tank system. The mud tank is shipped by bulk vessel with longer shipping time and higher freight cost. In spite of these disadvantages, impressed with GN Solids Control Hi-G dryer shaker quality, the customer insists on buying the mud tank system from us directly. The mud tank system is including one mud tank with necessary accessories, 2 mud agitators with double impellers & 2 mud guns for tank cleaning.
Continue reading »
written by admin
\\ tags: agitator, centrifuge, GN CIPPE, hi-G dryer, mud tank
Saudi Arabia is high end market for importing equipment, same case for oil drilling field solids control equipment. GN Solids Control is position on high end overseas market, like Saudi Arabia, Iran, Kuwait, Turkey, Yemen, Israel etc. Middle East Countries.
Recently, we receive purchase order from Saudi Arabia HDD contractor. The customer make mud tanks locally and buy solids control equipment from us. The equipment in the PO including:
- Mud cleaner, GNZJ594-2S12N, 2 SETS
- Centrifugal Pump, GNSB8X6J, 6 SETS
- Start and stop control panel for centrifugal pump, star-delta starting, 6 SETS
- Mud Hopper, 2 SETS
- Spare parts, 1 sets
- Mongoose composite material shaker screen as spare parts for Mud Cleaner, 36pcs
Continue reading »
written by admin
\\ tags: centrifugal pump, HDD, mud cleaner, shaker screen, solids control equipment
GN Solids Control is much professional in compact HDD mud system manufacturing. Recently we got purchase order from Russia and the end user is HDD contractor with Prime Drilling Rig. They want to match a small mud system to recycle the drilling mud effectively to save cost. After we show our project list for different users with Ditch Witch Rig, Vermeer Rig, American Augers Rig, the prime drilling rig customer is much impressive on GN compact mud system.
Prime Drilling Rig Mud System
Now the Prime drilling rig mud system is ready for delivery. It is equipped with solids control equipment as below:
one unit of small mud tank which can be put into one 20feet container;
one unit of mini mud cleaner with 2 panel shale shaker ( GNZS752) and 4 each 4inch desilter cones; the treating capacity is 200gpm.
One unit of centrifugal pump installed in slope tank for feeding desilter cones
One unit of centrifugal pump installed in the end of the mud tank to mixing hopper.
One unit of centrifugal pump as spare parts, which can be replace each of the pump for feeding desilter cone or for mixing hoppper
one unit of mixing hopper, 4 inch.
One unit of control panel; the user just need to plug the power generator with the control panel and then can use the the compact mud system. If for generator, it may require 100KW generator. We can also buy the generator for customer and match for them.
Continue reading »
written by admin
\\ tags: mud system, prime drilling, shale shaker, Solids control, Vermeer
GN Solids Control equipment mainly used on oil drilling, gas drilling, Coal bed methane drilling, Horizontal directional drilling and also geothermal drilling. Recently,we got inquiry from Kenya Geothermal Operation Company. They have one 750hp geothermal rig and want to match mud system for near future project. After have discussion with the operation manager, we offer one compact solution.
Mud tank:
Originally, we offer 3 options below:
Continue reading »
written by admin
\\ tags: desander, mud equipment, mud system, shaker, Solids control
Different country has different special requirement on drilling rig mud system for oil drilling. GN Solids Control can offer different special requirement on equipment which can satisfy most of customer’s request. GN Solids Control can offer drilling solids control mud system with IEC EX/ATEX/CE certificate. Besides, GN can also accept BV or DNV third party inspection. Recently, we exported one set 1000HP drilling rig mud system to Europe company with CE & ATEX certificate. The mud system have configuration as below:
- Two(2) sets Drilling Mud Shale Shaker, GNZS703HB, with customized orange color and LOGO
- Two(2) sets Drilling Mud Vacuum Degasser, GNZCQ270A, with customized orange color and LOGO
- Four(4) sets Drilling mud storage tank, with customized white color and LOGO
Continue reading »
written by GN solids Control
\\ tags: decanter centrifuge, drilling rig, mud system, shale shaker
Coalbed methane (CBM) reserves are a relatively untapped energy source with huge potential. It has become an important source of energy in all over the world, like Canada, United States, Australia, China, etc. The exploration of CBM is similar to geothermal well drilling. They mainly need rig, mud system, mud pump, and some other accessory equipment.
Continue reading »
written by admin
\\ tags: Coalbed methane, decanter centrifuge, geothermal well drilling, mud system
Coal Bed Methane (CBM) is natural gas contained primarily (about 90% -100%) of methane (CH4) found in coal seams. Methane is also the major component in petroleum natural gas (about 70% – 90%) that is widely used today. CBM is generated from the microbiological process or thermal process in the coal seam and recognized as one of the cleanest fossil fuels. Indonesia has one of the largest CBM reserves in the world with a potential 453 trillion cubic feet (“Tcf”), more than double the country’s natural gas reserves. The South Sumatra Basin, the largest CBM basin in Indonesia, is estimated to contain in-place resources of approximately 183 Tcf; and the Kutai Basin, the third largest CBM basin in Indonesia, is estimated to contain in-place resources of approximately 80 Tcf (SPE, 2004).
 CBM shale shaker GN has exported many sets of mud tank system to Indonesia for CBM project. The technique to exploit CBM is different with that applied to the fossil natural gas, while both share the common in terms of marketing and utilization. Simply, CBM is exploited by drilling shallow wells into coal seams, dewatering the seams, extracting the methane from the seams and finally compressing the methane.
When design the CBM mud tank system, you should consider the following points:
1 shale shaker inlet method, usually the CBM well is lower than oil drilling well, maybe they will not use overhead manifold, but they have a mud pit and a submersible slurry pump to shale shaker.
2 fine particles, CBM drilling may contain much fine particles, most of clients will use high speed centrifuge.
3 Mud tank height, it should be a little lower than oil well drilling mud tank system.
Continue reading »
written by GN solids Control
\\ tags: CBM, coal bed methane, mud tank system, natual gas drilling, oil well drilling, solids control equipments
|
GN Solids Control Brochure
