Gas Buster is called also called vacuum degasser in oilfield drilling fluids gas separating.

Gas buster

A  Gas Buster is a simple separator vessel used to remove free or entrained gas from fluids circulated in the wellbore, such as mud used during drilling operations. The gas buster typically comprises a vessel containing a series of baffles with a liquid exit on the bottom and a gas-vent line at the top of the vessel.

GN oilfield Gas Buster

Our oilfield Gas Buster operates on a “thin strata” principle. The drill mud enters the tank and forces it to flow and distributed to a layer of internal baffle plates engineered to allow the liquid inside the oilfield Gas Buster to flow as thin film and is exposed to the vacuum within the vessel. This layer of mud allows the gas to escape or break out of the mud . The vacuum pump releases the gas and discharge it to the disposal line. Mud exits the vessel under the action of the venturi and is returned to the mud system.

GN Gas Buster operates in three functions – mud circulation, vacuum creation and gas removal.  The Gas Buster  is used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, gumbo removal equipments (if utilized), shale shakers and mud conditioners (if utilized), while hydrocyclone desander and Decanting centrifuges follow in the arrangement.

Gas Buster type

Vacuum tank degasser Type is the most common form of degasser. Vacuum tank degasser  can be horizontal, vertical or round vessel. A vacuum action is created to pull in the gas cut mud. When the liquid enters the tank it will flow and be distributed to a layer of internal baffle plates designed for the mud to flow in thin laminar film and is exposed to a vacuum that forces the gas to escape and break out of the mud.The vacuum pump moves the escaping gas from the vessel discharging it to the rig’s flare or environmental control system. Vacuum degassers are neccessory for drilling mud system in oilfield.

GN manufacture Mining exploratory drilling mud equipments,drilling fluids circulation system for recycling drilling mud.

Mining mud equipments

Mining exploratory drilling requires that the borehole be stabilized while obtaining the maximum geological information from returning core or cuttings. The drilling fluid system design must be able to address some of the most challenging geologic conditions. From exploratory drilling to core recovery, the drilling fluid must maximize borehole stability, properly clean the hole and maximize core recovery.

GN Drilling mud system include a jet mud mixing hopper which mixes bentonite  easily to provide viscosity and suspension of cuttings and provides a high quality filter cake to aid in stabilizing the warehole.

GN drilling mud equipments for the system like the shale shakers,mud cleaners are always customized specially for convenience and cost-effective drilling.To help the drilling rig get the most efficiency.

GN drilling mud system for Mining exploration is specially designed for easy mixing. The mud system enhances the filtration control properties of a drilling slurry and also helps stabilize problem shakes.

If you want to learn more about our drilling mud equipments and system design for mining exploration drilling rig.Pls feel free to contact us.

How to get HDD Drilling Equipments at a beat price?It’s time for you to look for HDD Drilling Equipments For sale at the world crisis.

HDD Drilling rig

Now we have a suggestion for you to get a good price For HDD Drilling Equipments full package.You know in HDD drilling,the two main parts of the equipments are 1,HDD drilling rig,3,HDD mud equipments.

It would be wise idea to get the two parts from different HDD drilling equipments manufacturers.But it may not be convenient for you.

GN Solids Control solutions,As a HDD drilling mud equipments manufacturer,we are discussing with HDD drilling rig company in China about cooperation.You can contact either of us,but get the complete package for your HDD drilling equipments at manufacture price.

Complete HDD Drilling Mud Equipments From GN Solids Control

• Fluids Processing System
• Shale Shaker
• Mud Cleaner
• Desander
• Desilter
• Decanting Centrifuge

More about HDD Drilling
Directional boring, commonly called horizontal directional drilling or HDD, is a steerable trenchless method of installing underground pipes, conduits and cables in a shallow arc along a prescribed bore path by using a surface launched drilling rig, with minimal impact on the surrounding area. Directional boring is used when trenching or excavating is not practical. Directional boring minimizes environmental disruption. It is suitable for a variety of soil conditions and jobs including road, landscape and river crossings. Installation lengths up to 6,500’ (2,000m) have been completed, and diameters up to 56″ (1,200mm) have been installed in shorter runs. Pipes can be made of materials such as PVC, polyethylene, Ductile iron, and steel if the pipes can be pulled through the drilled hole.

Don’t wait,get HDD Drilling Equipments For sale now.

We got an inquiry for Mud Mixing/recycling system  for Oil/HDD/Drilling

Looking to buy Mud Recycling system specs like below:

Mud Recycling System

Output: Up to 350 USgpm (1300 litres/min)
Cut Point: 16 microns
Capacity: 4000 US gallons (15,000 litres)
Pumps: Three 3 x 4″ centrifugal pumps with approx 22kW motors
Power: Integral control panel for all electrical functions.
Please quote price CIF Mumbai, India or Kolkata, India.

About GN Drilling Mud Systems/Mud mixing Equipments

GN Solids Control Mud delivers a wide range of modern, innovative and cost-effective mud systems and equipment for both on- and off-shore applications. Each piece of equipment is designed and manufactured with a strong focus on quality, reliability, flexibility, and ease-of-use.

An effective and reliable mud recycling system is a fundamental part of any modern drilling application; from mud mixing to mud treatment, low pressure and high pressure mud equipment, bulk storage to mud system control, TTS Sense Mud offers a full range of quality solutions designed to add value to your drilling project.

GN Drilling Mud equipment is custom-designed to individual project requirements and manufactured to the most rigorous standards, providing our customers with safe, cost-effective and reliable mud mixing, for oil gas drilling,Horizontal directional drilling.

Our Equipments for this Mud Mixing/recycling system of Oil/HDD/Drilling

S/n    Description    Quantity    Unit
1,    ZS63×125-3  Shale shaker 1
2,      ZQJ100×6 Mud cleaner 1
3,      SB4×3-13 Sand pump             1
4,      LSB4×3-13 Sand pump 1
5,      Mud Tank  6000×2500×2900mm    1
6,      Jet mixing hopper 1

Welcome to contact us for more customized  Mud Mixing/recycling System  for Oil/HDD/Drilling

GN Solids Control is an oilfield Decanter centrifuge China Based Manufacturer,our decanter centrifuge rangles from low speed to high speed,and we also supply virable decanter centrifuge for drilling mud.

LW355-1250N series of high speed centrifuge produced by our company can better meet the above requirements.
Model and technical parameters.

Horizontal decanter centrifuge

2.1 Centrifuge Model：GLW  355-1250N
High quality stainless steel made
Effective roller length 1250mm
Inner diameter of the roller 355mm

High speed horizontal decanter centrifuge
2.2 Technical parameters
Rated liquid processing capacity：40m3/h
Rated slag tipping capacity：5t/h
Mix separation point：2μm
Rotating speed：3200rpm
Highest separation factor：2035
Main frame power：37kw
Auxiliary frame power：7.5kw
Pump engine power: 5.5kw (standard deploying 5.5kw long-pole pump, can deploy 11kw screw pump according to the need)
Features of this GLW  355-1250N High speed horizontal decanter centrifuge
a)    Oil gas exploration developer wish to use more clean mud drilling to protect the oil gas layer so as to achieve higher oil gas production.
b)    The using of turbo screw drilling technology put forward higher requirements on the mud cleanness.
c)     More attention will be paid to the disused mud treatment, while treat the disused mud is mainly to separate solid phase from liquid phase as much as possible.

Medium speed centrifuge can separate solid phase granule with the diameter of 5~7μm in low-viscosity mud, as to the thinner granule and high-viscosity mud or the granule in oil based mud, it can not separate them well. So, medium speed centrifuge can hardly meet the new requirements of solid-control system, deploying high speed centrifuge is the development trend in future.
LW355-1250N series of Horizontal high speed centrifuge produced by our company can better meet the above requirements.

One of the largest Oil Gas Directory Rigzone list GN Solids Control in their online directory.

Rigzone Directory Notification as below:

Congratulations – your company website (www.gnsolidscontrol.com) is the newest addition to Rigzone’s Online Oil and Gas Directory! After careful review by Rigzone’s editors, your site was approved. Your site listing will be available at search.rigzone.com within 3-5 business days.

Our list in Rigzone:GN Solids Control

GN Solids Control Products & Services in Rigzone directory:

Directory Categories

Companies >> Manufacturers & Suppliers >> Solids Control

Who visits Rigzone?
Rigzone’s vibrant, quickly growing audience and member base spans the upstream oil and gas industry from major corporate executives to influential independents.

• Drilling rig owners and operators
• Offshore support services (tugs, tenders, caterers, parts suppliers, etc.)
• Oil and gas industry executives from large multi-nationals to smaller independents
• Oil and gas industry human resources directors and departments
• Oil and gas industry workers and job seekers of all skill levels and areas of expertise
• Parts and equipment manufacturers, distributors, and suppliers
• Investors and analysts involved in the oil and gas industry

What does Rigzone offer?
Rigzone provides its visitors and membership with an unequaled source of information – a true industry gateway full of dynamic, original content and resources that cannot be found anywhere else.

• Online Oil & Gas Directory – the industry’s most complete listing of online oil and gas industry companies and related services
• Offshore Rig Data Services – continually updated status and location information on the world’s offshore drilling fleet
• Offshore Permits Service – daily and weekly offshore drilling permits and plans for the Gulf of Mexico, Texas, and Louisiana
• Career Center – a vibrant community of job seekers and employers in the oil and gas industry
• Classifieds Marketplace – online forum for buying and selling new and used goods and services
• Data Services – up-to-date news and information, rig usage reports and trend analysis, and much more
• Financial Information & Analysis – an industry specific guide to the financial positions and important information for the oil and gas industry’s publicly traded corporations
• Newsletter Service – weekly updates to your inbox full of news and commentary, rig information, and more

Sand Pump in China with Models,we usually call SB series Sand Pump.Since In Chinese,Sand Pump is Call Shabeng, So we select the first letter as “SB Sand Pump“.

SB Sand Pump

Explanation of SB Sand Pump  model

SB 8 × 6 — 14

• SB :Sand pump code

• 14:Sand Pump Impeller diameter

• 6:Sand Pump Export diameter

• 8:Sand Pump Inlet diameter

SB series oilfield  Sand Pump Technical Parameters

SB Sand Pump Operations

A. Preparations

(A). Inspect the rotating direction

(B). Rotate the pump shaft by hands and ensure that it rotates smoothly

(C). Fully open the valve at suction section.

(D). Fully fill the pump and suction piping with liquid in order to eliminate air in them.

(E). Open all the cooling water-pipes.

(F). Lightly open the valve in delivery pipe system (if using a vacuum pump for priming, the valve must be fully closed before starting the main pump).

B. Operation for Running Sand Pump

(A). Start up the motor after all the preparations is finished.

(B). Gradually open the throttle valve of outlet after the pump pressure is stable and close it if no liquids flowing out. Gradually re-open it after the pressure is stable and until the capacity is normal.

(C). Operating conditions

a.Speed:1480r.p.m

B.Max Pressure: 10.5Kgf/cm²

c.Max Temperature:120℃

Sand Pump is the ideal equipment to provide impetus for Desander 、Desilter and Jet Mud Mixer. It can also be used as Charge Pump auxiliary perfusion for mud pump and Trip Pump for drilling well head

Welcome to contact us for quotation,and consultant of SB Sand Pumps.

JBQ mud agitator is a part of solid control system of mud tank, which is mainly used in agitating and blending drilling fluid so as to control the depositions of solid particles in its tank cycling system and keep the drilling mud property of circulation stable and mixture uniform.The drilling mud agitator are required for storage mud tanks,and mud tanks

Drilling Mud agitator

with solids control equiments.

Learn more about the specs for GN: Drilling mud agiator

JBQ Drilling mud agitator has some major features as following:

(1)       The reducer of the agitator adopts a cylindrical worm with an axial section of circular acre. The circular acre teeth of impeller wheel are conjugated with the worm, which provide good convexo-concave engagement, high efficiency transmission, strong agitating ability and compact structure.

(2)       The reducer of the JBQ drilling mud agitator  combines with anti-explosion motor, which is suit for rough operation condition in field, and can be repaired conveniently.

(3)        New up-down structural agitating impeller wheels have a two-layers structure, which can be used as one-layer and dual-layer one.

(4)       The strong agitation, broad conformance and low starting moment of resistance are provided.

(5)        The drilling mud agitator Level – placed motor is easy for installation, adjustment and replacement.

As 1 of top 10 China solids control manufacturer,we also design complete equipments for horizontal directional drilling mud system.Get competitive price,top quality mud agitators from GN solids control.

The drilling mud cleaning system are required in oil well drilling,horizontal drilling,the mud cleaning system fuction is for preparing clean mud for drilling rig.

HDD Drilling mud system

Generally,The mud cleaning system for removal of drill cuttings and recovery of drilling mud coming from an oil well, where the mud slurry may be made up essentially of barite particles having a specific gravity of 4.2 or more and a particle size mostly under 200 mesh, drill cuttings having a specific gravity of 2-3, and varying particle sizes ranging from 200 mesh to 1/2 inch or more, and water;

• In oil well drilling, drilling mud must be supplied to the hole as the well depth progresses. One of the basic functions of drilling mud is to carry the drill cuttings up to the surface so they can be disposed of. A drilling mud in common use today is typically composed of barite and water. There may be other constituents, (such as oil) but they would exist only in small amounts or percentages. Since large quantities of drilling mud are needed in drilling an oil well, it is desirable to recover the barite, and recycle it. Various drilling mud cleaning systems are in use today for separating the drill cuttings from the slurry so that the fluid and/or barite can be recycled. Most systems use a combination of one or more screens or sieves in a series flow relationship, with a final separating step using a hydrocyclone or centrifuge. Hydrocyclones desander and decanting centrifuges are expensive pieces of equipment with high energy and maintenance costs.

• In HDD drilling mud cleaning system,sometimes there is a single tank, closed-loop system or a multi-tank mud system is required, GN Solids Control can develop the proper system to meet specific requirements. from small HDD (hirontal directional drilling mud system) to deep oil well drilling mud system.

When design HDD drilling mud mixing tank,and storage tanks,when should take the following items for consideration.
The pictures are :Drilling Mud mixing tanks for export

Welcome to Consult us for HDD drilling mud tanks or mud system design as well as oilfield drilling solids control system design.Cost-effective solutions are guaranteed .

mud storage tanks

• All Mud Tanks to be equipped with agitators with sufficient turnover rate to prevent settling mud.
• All drilling mud tanks shall be equipped with level sensors.
• Electrical equipment shall be suitable to be located in zone oilfield  environment.
• The chemical dosing system shall consist of 5 feeding stations where 4 stations are combined for dry bulk and liquid.
• The feeding stations shall be able to feed into two separate mixing lines. The unit shall be able to handle single sacks.
• The chemicals shall be transported, stored and mixed without any risk for spillage orharmful exposure for personnel.
• The drilling mud tanks shall be completely covered and ventilated with inspection hatches.
• The HDD (Horizontal directional drilling ) mud tank design shall ensure easy cleaning and easy access.

• The H.P. shear unit shall be located in the mud  mixing tank, chemical mixing tank, and one storage tank.Two separate mixing lines shall be available simultaneously to familitate mixing in both the active and storage system.
• The triptank shall be designed to measure volume variance down to 0.1m3. Measurement by two independent systems.

GN Solids Control design manufacture and export drilling mud mixing tanks and drilling mud storage tanks internationally.Welcome to contact us to consult for design and manufacture drilling mud tanks.

We also design HDD drilling mud tanks mounted with Equipments like desander,desitlers,or mud cleaners.

Each drilling  mud tank shall have possibility to be isolated from the system during maintenance.
he agitator gearboxes to be greased. One drilling mud storage tank and the slug tank to be designed for 2.0 s.g. mud. The reminding tanks shall be designed for 1.8 s.g. mud.